What are you working on? (4 Viewers)

[Beach80]

and it begins. I have had this idea in my head from day one of purchasing this trailer. Going to put a RTT on it. More details to come...

View attachment 3626007
View attachment 3626008View attachment 3626009View attachment 3626010

A friend of mine has the trailer with the rtt, it really is convenient. He stores his coolers and all cooking stuff in it, keeps his sequoia less cluttered. He added an awning to it too. My only criticism of it is its top heavy for its narrow wheel base and was a bit sketchy taking to the upper tract of rapidan wma. Wider wheel base and more articulation on suspension is an upgrade He is looking into. The trailer you have looks wider in the pictures than his

 

[Land Shark]

A friend of mine has the trailer with the rtt, it really is convenient. He stores his coolers and all cooking stuff in it, keeps his sequoia less cluttered. He added an awning to it too. My only criticism of it is its top heavy for its narrow wheel base and was a bit sketchy taking to the upper tract of rapidan wma. Wider wheel base and more articulation on suspension is an upgrade He is looking into. The trailer you have looks wider in the pictures than his

Yeah they can get tippy for sure. Im 66” wide. This is not a trail rig only a camper. I have been using this since 2011 with the original tarp as my tent.

 

[Land Shark]

Typical set up at camp

 

[matzell]

@POTATO LAUNCHER makes some really cool trailers. I saw several at SAS # last year. Here is one I saw last year. post #7

CASTING CALL - overland trailer

Yo my central Texas friends. I am working on a national Chevrolet Truck campaign and one of the props I need to source is an overlanding trailer to be towed behind a truck in a scene to a remote camping/fishing spot. This will likely be filmed at Reveille Peak Ranch near Burnet. What this...

forum.ih8mud.com

 

[Toyodajunkie]

and it begins. I have had this idea in my head from day one of purchasing this trailer. Going to put a RTT on it. More details to come...

That thing was set up sweet before. Looking forward to seeing what you have in store for this next one!

 

[Toyodajunkie]

If you do plan out the night you work on this post it up I would be interested in watching you weld it up. Also planning to do a rear swing out and would like to talk about it with you after your recent experience. Already have the swing out part just have to weld the spindle to the bumper and figure out the latching system.

I didn’t see this until Sunday morning and had pretty much finished the welding by then. Whenever I had a free 5 minutes I would run out to the garage and throw a couple welds on it to ensure I didn’t over heat and warp it. This is a pic of the link pretty much done minus some paint.

Weather is looking decent on Saturday so plan to install them then and reinforce the frame side lower link mount. Whoever wants to come shoot the crap are more than welcome but I do live 20mins past Mechanicsville Lowe’s.

 

[FamilyCamper]

I didn’t see this until Sunday morning and had pretty much finished the welding by then. Whenever I had a free 5 minutes I would run out to the garage and throw a couple welds on it to ensure I didn’t over heat and warp it. This is a pic of the link pretty much done minus some paint.

Weather is looking decent on Saturday so plan to install them then and reinforce the frame side lower link mount. Whoever wants to come shoot the crap are more than welcome but I do live 20mins past Mechanicsville Lowe’s.

View attachment 3626202

All good nice work with it! Busy with autumns bday Saturday but hoping to have some free weekends in the next couple months to get together and work on stuff.

 

[FamilyCamper]

Time for the sun blocker to come back out!

 

[Land Shark]

Time for the sun blocker to come back out!

View attachment 3626361

I thought we were friends

 

[Beach80]

Adjusted my accelerator cable and kick down cable, surprising the difference in throttle response that made.

 

[captainva]

I think my kickdown cable needs to be adjusted, but I’m too young to understand what any of that actually is

 

[Beach80]

I think my kickdown cable needs to be adjusted, but I’m too young to understand what any of that actually is

It's the cable with an orange cap most likely

 

[captainva]

I’ll take a look on the next tech day

 

[Land Shark]

Round one complete. mocked up crossmembers. Not complete just a good 2hrs and a few Banquets..

 

[davidp14]

swung by Robs yesterday to get my spare tire for the 80 mounted on the new rim I found at relic (with robs help). Then got tacos!
Thanks @matzell !

Went home and replaced the rusty battery hold down on the 100.

 

[captainva]

Round one complete. mocked up crossmembers. Not complete just a good 2hrs and a few Banquets..

View attachment 3626741

I would add at least one diagonal crossbrace between the posts on each side. Not that it will but those could just fold over if you hit a big enough bump

 

[Land Shark]

I would add at least one diagonal crossbrace between the posts on each side. Not that it will but those could just fold over if you hit a big enough bump

Way a head of you big guy

 

[Toyodajunkie]

Round one complete. mocked up crossmembers. Not complete just a good 2hrs and a few Banquets..

View attachment 3626741

That material looks eerily familiar.

 

[Land Shark]

That material looks eerily familiar.

I knew of all people you would appreciate it. Seeing that I had a bunch of it laying around from many years and all the parts and pieces etc why not. I also built my home gym out of it. Pull up bar, bench rack, and dumbbell rack all from this precious material.

 

[Beach80]

Replaced left front window motor and some trim today window works much better. Still need to replace run channel. Then trim and run channels on all the windows at some point