Westcott Collar Lift w/ Old Man Emu 2” Heavy?? (1 Viewer)

[Yukon LX]

Can you add a Westcott Collar lift to a 2 inch OME lift for more overall lift. I originally put. Leveling kit on top of the struts, and this blew the CVs.

Is there any way to combine the Westcott Designs with Old Man Emu Heavy?

 

[open country]

I wouldn't, but if you're set on it I don't see why you couldn't in theory.

 

[Yukon LX]

I talked with Wescott, and it will not work. Their pieces are only milled for factory struts

 

[TeCKis300]

Unfortunately won't work as you confirmed.

Perhaps bigger tires or body lift if you are after more.

 

[Yukon LX]

Unfortunately won't work as you confirmed.

Perhaps bigger tires or body lift if you are after more.

I am already running 37s. With the OME lift, there is just a bit too much rake. Do you know of a 200 body lift?

 

[TeCKis300]

I am already running 37s. With the OME lift, there is just a bit too much rake. Do you know of a 200 body lift?

I don't know of a kit, but here's a great thread documenting body lifts. Some running tapered lifts @MTKID for his 40s that might be relevant for your setup.

Yup. Fat Amy gets a body lift.

They said it couldn't be done. They were wrong. I originally decided to do a 2" body lift. I got all the parts and hardware ordered, and got started on Thursday morning. I woke up early Friday and finished installing the lift. It was not easy, and took a lot of careful planning, measuring, and...

forum.ih8mud.com

I'm brainstorming on this too. Put together this cheat sheet for a square 1" lift with info distilled from that thread. Thanks to MTKID and @nwfl4runner for the details.