Weatherpack connector source?

[Klunky Chris]

does anyone have a good source for Delphi Packard Weatherpack connectors?

www.waytekwire.com has them but they only sell in lot's of $5 or 100 pieces, whichever comes first.

so you need male plug $5, female plug $5, male terminals $5 female terminals $5, seals $5, and plugs for empty slots $5...... that's $30 for the 2 taillight plugs I need

I found This Guy on Ebay, but I'm leary of buying from him as I don't know him.

Anyone have any ideas?

if not, I'll probably just shell out the moolah to Waytek

 

[dfmorse]

Might try this:



http://store.summitracing.com/default.asp?target=egnsearch.asp&N=115+400012+313898&autoview=sku

http://www.jegs.com/webapp/wcs/stor...goryId=17617&parentCategoryId=10409&langId=-1

 

[Ming89FJ62]

this may be more what you're looking for -


http://www.delcity.net/delcity/serv...ildid=313329&page=1&tabset=1&pageitem=1&new=y

they're more friendly to minimum orders

 

[steven4mc]

or even

http://www.quickcar.net/ign_sys/terminals.html

 

[Klunky Chris]

thanks everyone!!!!

the last 2 links are great. does DELCITY have minimum # purchases like Waytek?

 

[mattg]

May want to check your local auto parts store if you've got a decent one. My local NAPA can order them, and Bumper2Bumper had some on the shelves and can order some also.

 

[Cammy]

Salvage yards.

 

[pappy]

thanks everyone!!!!

the last 2 links are great. does DELCITY have minimum # purchases like Waytek?

Yes, but their minimums are lower. In some cases their prices are better too. DelCity and WayTek are electrical toy stores. How many do you need? I have extras left over from my project. Hit me off line.

Jon

 

[Ming89FJ62]

Delcity does have minimum order quantities on some items but many are in the 1-5 area. I've not been disappointed w/ anything i purchased from them.

Harry

 

[HogDriver]

http://www.centechwire.com/

I think they sell in packs of six. Good company to deal with...no affiliation.

Cheers

 

[zglad]

Hey guys, not too familiar with installing this type of connector. I have seen some crimping tools for $100+. Is this type of tool required to install this type of connector?

Thanks,

zglad

 

[HogDriver]

You can do it with a pair of needle nose... just takes practice. If you want the 12 ga - 20 ga crimping tool that sounds about right. You can get one size crimping tool for 18ga IIRC for 30.00

Cheers