Water Bypass Hose (PHH #2)

[jaymar]

So, this pesky little critter lives behind and underneath the throttle body. Would like to replace while I'm in there, but do not know the shape of the entire house. I don't want to pull it off without making sure I have a replacement ready. Do any of these gates hoses look like the ticket? Or does anyone have a photo of the proper hose?

 

[Jgrauman]

What Did You Do with Your 80 This Weekend?

 

[BILT4ME]

So, this pesky little critter lives behind and underneath the throttle body. Would like to replace while I'm in there, but do not know the shape of the entire house. I don't want to pull it off without making sure I have a replacement ready. Do any of these gates hoses look like the ticket? Or does anyone have a photo of the proper hose?


View attachment 1747538 View attachment 1747539

It's the bottom one in the picture.

Hint:
Install the squeeze clamp on the hose first, then spit in it and push it over the nipple from the DS underhood.
Then install the TB and the hose on the top end.

The cool thing about Toyota hoses, they all have a yellow mark on the hose that shows where the clamp seam needs to be.

 

[jaymar]

Do the red arrows point to the two throttle body coolant hoses?

Neither P/N gets me any useful information...

Thanks!

 

[mingles]

This is 16261G in your diagram (bypass hose # 1).

 

[jaymar]

This is 16261G in your diagram (bypass hose # 1).


View attachment 1767650

View attachment 1767649

Thanks! So that goes HERE on 95? (Searching dealer site on that P/N gets me zip...)

 

[mingles]

IIRC (it’s been 2 yrs since I’ve had mine apart) the hose end you point the green arrow to is the left side end in my first pic (with the tape measure). Mine is a ‘97 but I think the ‘95 is the same.

 

[jaymar]

IIRC (it’s been 2 yrs since I’ve had mine apart) the hose end you point the green arrow to is the left side end in my first pic (with the tape measure). Mine is a ‘97 but I think the ‘95 is the same.

Great, thank you. This oughtta be fun.

 

[jaymar]

Btw, the full dealer P/N on this puppy is 16261-66040.
Shorter hose off other side of throttle body is 16264-66021.

Apparently to get the actually-useful P/Ns (the ones with the dashes), you have to call the dealer and they have to click on the number in their database to get the full number...

*sigh*

 

[MoJ]

Search PHH Neighbor.

I wouldn’t replace it with bulk hose.

 

[Jgrauman]

I used gates heater hose, GASP!! didn't even pull the throttle body to replace it. Was pretty easy for me. Went to O'Reilly and they had a huge box of cut heater hoses of various sizes and lengths next to their cut to length stuff. I asked if I could have it, he said, merry Christmas.

 

[jaymar]

Search PHH Neighbor.

I wouldn’t replace it with bulk hose.

Already replaced PHH with 52-inch GGStripe after screwing around with that tiny oem-spec replacement for 3 hours.
THIS hose I'm looking to replace with oem, just ordered.

 

[MoJ]

Already replaced PHH with 52-inch GGStripe after screwing around with that tiny oem-spec replacement for 3 hours.
THIS hose I'm looking to replace with oem, just ordered.

It’s not the PHH. It’s the PHH neighbor! Totally different. Search

 

[Hornd]

After the Struggle to get the PHH off there was not a chance I was putting OEM back. Broken bracket went in trash and bypass went on with 2 constant torque clamps....sleeping easy on this one.