- Thread starter
- #941
The expertise on here blows me away. I need my reading glasses to decipher a light!
Unobtainium (12 Viewers)
- Thread starter Racer65
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #942
The connector looks like two H4 connectors back to back. One is for the light; the other is for the DRL. You can plug in the light and get going in under 20 minutes, then come back to hook up the DRL later.
The DRL connection is two wires. The red wire supplies power; the yellow wire is for the turn signal.
I'll provide an install guide by the time folks receive this.
- Thread starter
- #943
I'll get a better shot later, as this was taken through the window with the car running.
- Thread starter
- #944
For those following the NBA playoffs, you may have seen the new BMW commercial that pop up during each break, pitching the LED headlights like only they have it! 
- Thread starter
- #945
Took some better night shots of the LED lights:
Need to try to get a low-beam night shot at different distances with either reference objects like road signs or markers . I usually shoot for a medium colored building and take photos at 100/200/300ft for reference shots . If any are taken on a street , make sure there are no backround lights or street lights . Huge parking lots that have pavement stripes are good reference for distance and what is hitting the road versus being scattered as well . Hands down best place is a 2-lane tunnel without interior lighting or other traffic - that shows everything including wasted vertical output ...
Sarge
Sarge
Do you have any of the cowling drain hoses available?
Last edited:
- Thread starter
- #948
Yes. Unless it's shown as out of stock in my store page, it's available.
A big thanks to Racerm65. I bought the disc brake booster, which fits and works great, plus a little expert advice when my son had a installation problem. My son's problem, not the product. Terry
Thank you...
- Thread starter
- #951
@65swb45
Mark,
I'll be returning your NOS steering gasket today along with a copy of our reproduction piece. Will send you the stainless hose clamps in the same package as well. Enjoy!
Production will ensue shortly. If anybody is in a big hurry to grab a piece, I only have one other prototype piece available at this time. First come first serve. Price is $25 a piece + $3 shipping.
Mark,
I'll be returning your NOS steering gasket today along with a copy of our reproduction piece. Will send you the stainless hose clamps in the same package as well. Enjoy!
Production will ensue shortly. If anybody is in a big hurry to grab a piece, I only have one other prototype piece available at this time. First come first serve. Price is $25 a piece + $3 shipping.
I'll take the remaining prototype. IM to follow.
Production will ensue shortly. If anybody is in a big hurry to grab a piece, I only have one other prototype piece available at this time. First come first serve. Price is $25 a piece + $3 shipping.
Production will ensue shortly. If anybody is in a big hurry to grab a piece, I only have one other prototype piece available at this time. First come first serve. Price is $25 a piece + $3 shipping.
I would like to purchase the air intake could you send me info on cost and how to purchase from you? Thanks ! Love it
- Thread starter
- #954
Here's the link to my store site:
Shutterfly
To purchase, it's just email and PayPal for now (Order instruction is on the right side of the store page), but a shopping site is in the works.
DSB345
SILVER Star
Got my stuff today!! Thanks again for sending it out so quick.
PabloCruise
SILVER Star
Is he all done making lenses and delete plates?
Ever though about reproducing the seat track knob for the bucket seats in the FJ40? I don't think anyone else does and they get brittle. When you re-do your seats they break.
You'd have to ask him. I haven't talked to him for a couple years.