Turning fj60 into an fj45 and then some (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

It's been a month, are you done yet?:bounce::bounce2:
 
We are going to close on a new house today with a 1,700 sq ft shop that lift ready. So, as soon as we get settled and the lift installed, one of the first things we are going to do is lift the old body off the 60 and start measuring - and order cab et. al. from Acqualu.

Recommendations on lift to buy/install accepted. Looking at Atlas.
 
We are going to close on a new house today with a 1,700 sq ft shop that lift ready. So, as soon as we get settled and the lift installed, one of the first things we are going to do is lift the old body off the 60 and start measuring - and order cab et. al. from Acqualu.

Recommendations on lift to buy/install accepted. Looking at Atlas.
Awesome, congratulations!
 
Peter,

Congrats on new house and shop! Been using lifts for 30 years, I recommend Rotary lifts as they are in the upper end of quality and price. I always thought if I’m going to be under cars I’m going to get the best! 7k should be Fine, I have a 10k just in case I have to work on my dually or military rigs.
 
Okay, this plan has 'evolved'. See it now in Hardcore here

 

Users who are viewing this thread

Back
Top Bottom