Trail Tailor Offerings- Racks, Sliders, Control Arms and Misc (7 Viewers)

[Kabanstva]

Definitely put me down for a fuse bracket if you start selling these.

 

[TRAIL TAILOR]

Definitely put me down for a fuse bracket if you start selling these.

I'll be working on the late 100 series model in a few days/week.

J

 

[trdcorolla]

I'll be working on the late 100 series model in a few days/week.

J

There's a difference between the early 100 series models in that area of the engine?

 

[TRAIL TAILOR]

There's a difference between the early 100 series models in that area of the engine?

98-02 has the evap canister there, 03-07 does not. 03-07 will be up against the fender.

 

[yotasavg]

Interesting difference. I'll be wanting one as well.

 

[geanes]

I was commissioned by @ga12r1 to make a direct bolt in fuse block bracket. Well here it is.

Here is the prototype. It will hold 4 different BlueSea panels (5026, 5025, 5029 and 5028) two 12 and two 6 circuit models and a spot for a Bussmann breaker as well. I'll make the first one from 1/8" aluminum and if I don't like it I'll bump to 3/16". Plenty of room under the hood too.

View attachment 2054447View attachment 2054448
View attachment 2054449

Yep... the oil dipstick is still accessible.

View attachment 2054450
View attachment 2054451

I'll take one of those in a HEARTBEAT! My 98 NEEDS that badly.

 

[TRAIL TAILOR]

I'll take one of those in a HEARTBEAT! My 98 NEEDS that badly.

You got it G!... I'm doing bodywork and paint on 2 -60s for the next 6-8 days and then they will go into production for the EARLY 100.

J

 

[DJCloz]

do you know the price point on the fuse bracket? now I ca relocate mine from being screwed to my fuse cover. lol

 

[TRAIL TAILOR]

70-80.00 is the rough estimate right now. I need to get @ga12r1 final made and then I can see how I like the 1/8" . If I like the 1/8" -- the 70 mark is in order, if I need to bump to 3/16" 80.00

J

 

[DJCloz]

deal!

 

[Txcoast]

70-80.00 is the rough estimate right now. I need to get @ga12r1 final made and then I can see how I like the 1/8" . If I like the 1/8" -- the 70 mark is in order, if I need to bump to 3/16" 80.00

J

I'm in for one for my 01 LX either way. Nice work!

 

[geanes]

@TRAIL TAILOR .... have you considered offering a "deeper/thicker" version of your hawse fairlead (http://www.trail-tailor.com/store/p133/Trail_Tailor_Winch_Hawse_Fairleads.html)? I have an IronMan bumper (ARB-style). The issue is that if the fairlead isn't like 1.5-2" deep, then the line can rub against the bumper if the rig is bogged nose down. Hope that description makes sense. The standard roller leads allow enough clearance, but the "normal" depth Hawse fairleads don't.

 

[TRAIL TAILOR]

@TRAIL TAILOR .... have you considered offering a "deeper/thicker" version of your hawse fairlead (http://www.trail-tailor.com/store/p133/Trail_Tailor_Winch_Hawse_Fairleads.html)? I have an IronMan bumper (ARB-style). The issue is that if the fairlead isn't like 1.5-2" deep, then the line can rub against the bumper if the rig is bogged nose down. Hope that description makes sense. The standard roller leads allow enough clearance, but the "normal" depth Hawse fairleads don't.

G,

Mine are 3/4" and I design my bumpers on a flush fit.

Buy the 1.5" Factor 55

 

[geanes]

G,

Mine are 3/4" and I design my bumpers on a flush fit.

Buy the 1.5" Factor 55

Aight. I really want to spend my money with you though To that end, when are you getting the rear LCA and UCAs back in stock? I really need to refresh my rear end.....no jokes please

 

[MongooseGA]

I've got a loose backside too.

We can keep straight faces together.

They're up next.

 

[ClassyJalopy]

My backend was like you guys but not anymore. Partsouq.com shipped all four control arms at an unbeatable price.

 

[BEG]

Aight. I really want to spend my money with you though To that end, when are you getting the rear LCA and UCAs back in stock? I really need to refresh my rear end.....no jokes please

Gary, the F55 doesn't fit the Ironman bumper. I bought it and it was too wide to fit the recess for the fairlead. I suppose you could grind the edges but even then, I wasn't convinced it pushed the line out far enough. I resigned myself to keeping the roller fairlead while I had the Ironman.

Also, @TRAIL TAILOR put me down for one of the early series fuse panel brackets!

 

[geanes]

Gary, the F55 doesn't fit the Ironman bumper. I bought it and it was too wide to fit the recess for the fairlead. I suppose you could grind the edges but even then, I wasn't convinced it pushed the line out far enough. I resigned myself to keeping the roller fairlead while I had the Ironman.

Also, @TRAIL TAILOR put me down for one of the early series fuse panel brackets!

Thanks for the info! Guess that means I need to upgrade to the Dissent front bumper I've always wanted

 

[BEG]

Thanks for the info! Guess that means I need to upgrade to the Dissent front bumper I've always wanted

I can confirm that it fits the Dissent perfectly

 

[bamabrock]

Gary, the F55 doesn't fit the Ironman bumper. I bought it and it was too wide to fit the recess for the fairlead. I suppose you could grind the edges but even then, I wasn't convinced it pushed the line out far enough. I resigned myself to keeping the roller fairlead while I had the Ironman.

Also, @TRAIL TAILOR put me down for one of the early series fuse panel brackets!

It doesn't fit the ARB either. I have one sitting in my garage, so I stacked two hawse fairleads