Toyota master cylinders (brakes)

[Spook50]

Does anyone know if Toyota made any 4-bolt master cylinders with a larger than 1" bore? I'm still running GM calipers in the back, and those combined with the larger 4Runner calipers in the front make for a lot of pedal travel with even a 1" master. Brakes work great, but I'm just tired of having so much more pedal travel than I did when stock.

 

[cruisermatt]

You have the stock master cylinder? Go to the FZJ80. Bolt-in besides a little bending of the brake lines.

 

[Spook50]

You have the stock master cylinder? Go to the FZJ80. Bolt-in besides a little bending of the brake lines.

I read that in Tom Hardy's voice.

Yeah I'm already running an 80 series MC with the 1" bore. IIRC the stock 60/62 bore is 7/8". If they make one that's 1 1/8" bore I think that'd be about perfect.

 

[PabloCruise]

I tried to start an FAQ in the 40 section on MCs and boosters, but no one cared.
I 'm not bitter or anything...

 

[Spike Strip]

I believe they make a 1 1/16" or it's possibly a 1 1/8 MC for HD v8 T100s ? @beno would prolly know and be able to get it...

 

[Spook50]

That'd be perfect if that's the case. Toying with the thought of putting a 4Runner booster on too if I change out my master cylinder. Be nice to have a nice firm pedal and responsive brakes. I just don't like having a ton of travel.

 

[Spike Strip]

Looks like it's 47201-34030 or 34031 - For early 90s T100 w/ ABS 1.0 Ton truck. Verify this info.


T100 master cylinder - Pirate4x4.Com : 4x4 and Off-Road Forum

OEM:

http://www.amazon.com/ADVICS-BMT-13...1443906548&sr=1-1-fkmr0&keywords=aisin+BMT139