- Thread starter
- #61
Nice! Looks great.
TorFab: FJ62 LED Headlight Kit and Install
- Thread starter NookShneer
- Start date
Content may include affiliate links. Please see terms for details.
Nice! Looks great.
It took me awhile to find this info through the search button so I thought I would repost it here. Aiming the headlights after install.
To sum it up....
1. Find a wall with a flat level run of 30'
2. Pull up to the wall within 12" on low beam.
3. mark with tape on the wall center of each light and the top of the low beam cutoff
4. Back up 25ft
5. Aim lights so center (side to side) is still lined up, but cutoff (up and down) is 3" lower
6. Done
To sum it up....
1. Find a wall with a flat level run of 30'
2. Pull up to the wall within 12" on low beam.
3. mark with tape on the wall center of each light and the top of the low beam cutoff
4. Back up 25ft
5. Aim lights so center (side to side) is still lined up, but cutoff (up and down) is 3" lower
6. Done
