Tire question (1 Viewer)

[SL8R]

Just acquired a 1978 FJ40 with 17-inch rims and 285/70 R17 tires. Rubbing on tie rods when turning hard. What is maximum width size recommended to avoid rubbing?

 

[pb4ugo]

You can adjust your wheels stops.

 

[charliemeyer007]

Might be a back spacing issue? I would not turn that sharp, when you hear it rub - back off until you don't hear it rub. I have been in places where its a 50 point turn to get out - a little rub at that time might be only a 10 point turn.

 

[Paul_A]

A back space issue, plain and simple. If it rubs either static or with a turning deflection try a 1/4" wheel spacer on the front to clear the tie rod ends.