Timing issues (1 Viewer)

[ToyotaMatt]

There is one single 10 mm bolt that holds the dizzy clamp in place. What difference would my socket size make? Or am I missing your point?

ID what clamp you have and report back ,




please


look over this thread a bit too , please

Distributor Clamp with Two Bolts

Just bought a 6/72 FJ40 and it has the F engine number label. I searched the forum but couldn't find my answer so... why does my distributor mount point have two threaded holes while the OEM distributor clamp for this year only has one (single sided)? I found an example of a clamp on eBay...

forum.ih8mud.com

 

[Gimmeurknowledge]

ID what clamp you have and report back ,




please


look over this thread a bit too , please

Distributor Clamp with Two Bolts

Just bought a 6/72 FJ40 and it has the F engine number label. I searched the forum but couldn't find my answer so... why does my distributor mount point have two threaded holes while the OEM distributor clamp for this year only has one (single sided)? I found an example of a clamp on eBay...

forum.ih8mud.com

View attachment 3004248




View attachment 3004250


View attachment 3004251

ID what clamp you have and report back ,




please


look over this thread a bit too , please

Distributor Clamp with Two Bolts

Just bought a 6/72 FJ40 and it has the F engine number label. I searched the forum but couldn't find my answer so... why does my distributor mount point have two threaded holes while the OEM distributor clamp for this year only has one (single sided)? I found an example of a clamp on eBay...

forum.ih8mud.com

View attachment 3004248




View attachment 3004250


View attachment 3004251

I definitely have a single bolt clamp. That's for sure. I tried uploading a photo but it didn't work.

 

[ToyotaMatt]

I definitely have a single bolt clamp. That's for sure. I tried uploading a photo but it didn't work.

ok ,

so what's the current status of the very unique short 12mm hex bolt holding the 1 hole updated clamp down in theory securely in place firm and snuggly hand torqued ...

 

[Gimmeurknowledge]

ok ,

so what's the current status of the very unique short 12mm hex bolt holding the 1 hole updated clamp down in theory securely in place firm and snuggly hand torqued ...

View attachment 3004427​

Are you telling me to idle my van with the bolt hand torqued?

 

[ToyotaMatt]

Not yet

I asked what that current status was ?

Up too you mentioned you only were adjusting the 10mm box bolt ?

The one that’s horizontal in location correct ?

 

[Gimmeurknowledge]

Not yet

I asked what that current status was ?

Up too you mentioned you only were adjusting the 10mm box bolt ?

The one that’s horizontal in location correct ?

Yes sir. It is horizontal. Oh, and my mistake, it's actually a 10 mm nut that I loosen to rotate the dizzy. I'd love to show you a photo.

 

[ToyotaMatt]

Yes sir. It is horizontal. Oh, and my mistake, it's actually a 10 mm nut that I loosen to rotate the dizzy. I'd love to show you a photo.

ok ,

lets address that topic before we go any further ,


click this link below , and choose the SILVER LEVEL Donation level , u will then instantly have FULL ON photos hosting abilities here on MUD eazy peezt too !


make it so , then report back lotz and lotz tech photos , because here on MUD .....................


PHOTOS or it DON'T EXIST is my motto for sure !

link here .......

https://forum.ih8mud.com/account/upgrades