Thoughts on these 60 interior Panels?? (2 Viewers)

[WSOPgold2012]

www.orikawa.net


4 doors: $749

• PRODUCT INFORMATION​

  • All Aluminum Construction
  • Speaker Ready
  • PALS Standard Attachment Points
  • Inner Window Felt Replacement Included
  • OEM Color Matched Powder Coat

• TECHNICAL SPECIFICATIONS​

  Front Door Panel
  • 4" Speaker Ready via 3.75" Cutout
    • 2" Maximum Recommended Speaker Top Mount Depth
  • Die Pressed Reinforcement Features
  • 5x5 PALS Standard Mounts for most large MOLLE pouches
  • 2mm 5052 Aluminum for Low Weight and Corrosion Resistance
  • Window Felt / Belt Weatherstrip replaces Toyota 68170-90A01
    Rear Door Panel
  • 6.5" Speaker Ready via 5.75" Cutout
    • 2.25" Maximum Recommended Speaker Top Mount Depth
  • 2x2 PALS Standard Mounts for most small MOLLE pouches
  • Window Felt / Belt Weatherstrip replaces Toyota 68190-90A01

Rear Panel" $699

• PRODUCT INFORMATION​

  All Aluminum Construction
  OEM Color Matched Powder Coat
  Two Latching Hinged Access Doors
  Fully Sealed SBR Weatherstripping
  Two Piece Design: Quarter Storage and Front Trim Cover
  • FJ62 install re-uses factory rear seatbelt trim cover
  
  

• TECHNICAL SPECIFICATIONS​

  3mm 5052 Aluminum for Durability
  Hinged Access Doors for Storage and Maintenance
  Takigen Push-to-Close Aluminum Latches
  Sunco Mounting Hardware Made in Japan
  OEM Color Matched Powder Coat by Cardinal
  SBR Rubber Seals for Door and Panel
  Rubber Well-Nuts for OEM mounting - no modification required

Tailgate: $549

• PRODUCT INFORMATION​

  Replaces OEM Tailgate Trim with Access Panel
  * product cannot be installed on OEM tailgate without permanent modification to tailgate. Instructions provided for necessary alteration.
  • All Aluminum Construction
  • OEM Color Matched Powder Coat
  • Two Latching Hinged Access Doors
  • Fully Sealed SBR Weatherstripping

• TECHNICAL SPECIFICATIONS​

  • 3mm 5052 Aluminum for Durability
  • Hinged Access Doors for Storage and Maintenance
  • Takigen Push-to-Close Aluminum Latches
  • Sunco Mounting Hardware Made in Japan
  • OEM Color Matched Powder Coat by Cardinal
  • SBR Rubber Seals for Door and Frame
  • Machined Door Flange for 270* Support

 

[bcolvin]

Those look great.

 

[TheElegantFox]

I really dig these, I've been looking for replacements for the FJ62 brown ones and it seems like every other company goes for black gray/black which would really clash with the rest of the brown/tan trim.

The link seems to take me to a music merch site though?

I think they're a .net not a .com: J60 Interior Quarter Panel Set | orikawa - https://www.orikawa.net/product-page/j60-interior-quarter-panel-set

 

[TheElegantFox]

Looking at the door cards themselves: J60 Door Panel Set | orikawa - https://www.orikawa.net/product-page/door-panel-set

They're only for the FJ60 doors with manual window cranks, not sure if they'd do a customization for FJ62 automatic window controls.

 

[WSOPgold2012]

I really dig these, I've been looking for replacements for the FJ62 brown ones and it seems like every other company goes for black gray/black which would really clash with the rest of the brown/tan trim.

The link seems to take me to a music merch site though?

I think they're a .net not a .com: J60 Interior Quarter Panel Set | orikawa - https://www.orikawa.net/product-page/j60-interior-quarter-panel-set

Hahahahhaa.....oooops

 

[ObservrActual]

That price seems kinda insane.

 

[MrFitzie]

They have a thread in Vendor - Misc: NEW 60 Series Storage Options - https://forum.ih8mud.com/threads/new-60-series-storage-options.1295508/

 

[tclark]

Those look pretty nice. Wish they came in a dark brown, although I guess you could get them painted/coated in whatever color you want. Wonder if you can buy them in bare aluminum?

 

[cwwfj60]

@CenTXFJ60 installed a set recently

 

[CenTXFJ60]

@CenTXFJ60 installed a set recently

I really like them. The dark brown would match the OEM ones. Spenser may ship a bare set or do a different color if you inquire with him.

 

[WSOPgold2012]

I really like them. The dark brown would match the OEM ones. Spenser may ship a bare set or do a different color if you inquire with him.

View attachment 3156534

those look great!!!

 

[JpinTX]

Sharp looking and think the aluminum will be a plus over the long haul

 

[TheElegantFox]

I really like them. The dark brown would match the OEM ones. Spenser may ship a bare set or do a different color if you inquire with him.

View attachment 3156534

I wonder if you could ID the coating on that rear seat carpet rail and use that as the FJ62 brown?

 

[CenTXFJ60]

I wonder if you could ID the coating on that rear seat carpet rail and use that as the FJ62 brown?

That seat back rail is not a good match to the Toyota color. I just used a brown rattle can I had on the shelf. Glad to post a pic of the color if you’d like it

 

[TheElegantFox]

That seat back rail is not a good match to the Toyota color. I just used a brown rattle can I had on the shelf. Glad to post a pic of the color if you’d like it

That would be awesome! I'm seriously considering getting these for my FJ62.

 

[orikawa]

Hey what's up everyone!

Send me a message if you have any questions for sure. I will be modifying the door cards to fit 62 ASAP. 80 tailgate, and some 1st gen truck panels too.

The quarters fit the 62 currently since they're 2-piece the front section doesn't need to be installed and drops right in with the 62 seat belt retractor trim in place.

One of the early customers stripped his tan door set and is doing the dark brown... im skeptical but we will see when they're done.

The point of the colors is to match the lower dash metal and it looks very factory that way.

Speaker cut outs are to accommodate common 3 way speaker sets... 90% of those fit depth wise and are tweeter, 3.5" and 6.5". Tweeter can be put anywhere without corrosion issues on the panels.

 

[orikawa]

Those look pretty nice. Wish they came in a dark brown, although I guess you could get them painted/coated in whatever color you want. Wonder if you can buy them in bare aluminum?

Just send me a message and we can figure out if it's something you'd like to do. Cost and time add up though you know with powder coaters these days

 

[onemanarmy]

Do you offer a color that matches with the grey/blue 62 interiors? Or just black would be fine.

 

[orikawa]

Do you offer a color that matches with the grey/blue 62 interiors? Or just black would be fine.

Yep. Grey looks awesome. Can do black too... but... OEM grey <<<<<

 

[algonaman]

I ordered some, the set minus the tailgate, super excited to get speakers working again and faded interior like new. Thanks Spenser.