Media The MUD 100 series Photos thread (21 Viewers)

Photo/Video/Audio threads

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Looks like you got two very nice rides there.....dont screw up or she may take the LC from you....it suits her style it appears after 2 glasses of wine. LOL

How did you run the wires from the lights on roof rack...down through weather stripping?
 
Yewww... BBQ BOY... pfran42, Just need the indicator lights ay? If you weren't so far away id sell you mine.. i still got my old TJM bar in the garage..
14122009.webp
 
Brock said:
Looks like you got two very nice rides there.....dont screw up or she may take the LC from you....it suits her style it appears after 2 glasses of wine. LOL

How did you run the wires from the lights on roof rack...down through weather stripping?
Click to expand...

She had to drive it home from the reception. She was like "Pawww, theee-as drives niiiice for havin' super swampers"

For the top lights I ran power up the driver's side weather strip channel thing. I glued little pieces of Velcro in the channel so that the wires are tacked down every 6 inches or so. At the top I used bullet connectors so that if I take the rack off, all wiring "unplugs" and then I just tuck the hanging end back inside the windshield channel.

12fishy said:
Yewww... BBQ BOY... pfran42, Just need the indicator lights ay? If you weren't so far away id sell you mine.. i still got my old TJM bar in the garage..
Click to expand...

Dude! I need the bumper ends and the indicator lights. Your lights might be a little small as I think we have slightly different models. My bumper has the "T" shaped jack-mount points on the inside of the indicator lights. Check my TJM thread (https://forum.ih8mud.com/100-series-cruisers/487071-i-need-tjm-help-down-under.html) and see if they would work. I definitely want to get these issues fixed on my bumper and will pay you top dollar if we could work something out. I'll PM you with details.
 
12fishy, you need some bigger tires to fill those wheel wells:D
 
Last edited:
non-USA speck Bridgestone U-Traction 7.50-16 bias ply on factory split wheels...

Looks great. Did you get those through Profitt's? Did the local tire place give you any beef on them being split rims?

Those wheels are awesome.
 
uzj100 said:
non-USA spec Bridgestone U-Traction 7.50-16 bias ply on factory split wheels...

Looks great. Did you get those through Profitt's? Did the local tire place give you any beef on them being split rims?

Those wheels are awesome.
Click to expand...

the wheels and tires came from Profitt's. they were already mounted and i have driven them lightly off road, but also towing a loaded U-Haul from southern Colorado to Seattle, WA with no problems.

No shop will deal with them I bet, I will check with Cruiser Dan soon and see if I can get the tire tools. At some point I will mount Swampers on them.
 
Cool. I know that fitting the tires is easy with a little cutting and the flares, but what upgrades to the front CVs do they do, do they install upgraded rear shafts, and what gears do they run?
 
I totally comply.

Such a crock of bulld*ck. Fuel efficient vehicles. They should part in the back so I don't have to spent $3 looking for a spot.

Sent from my iPhone using IH8MUD
image-1155736299.webp
image-333093345.webp
 
Haha so awesome to see the 100 parked in that spot!
 
You must log in or register to reply here.

Similar threads

Amazon100
New to the world the 100 series
Replies
0
Views
660
Amazon100
Amazon100
Katascopos
BMAC 100-series 'build' thread
Replies
4
Views
1K
Katascopos
Katascopos
huuunnnt
What is the 100 Series stock ride height?
Replies
9
Views
1K
Manhattan
Manhattan
F
Regearing 100 series. Thanks
2
Replies
20
Views
1K
kevgentile
kevgentile

Users who are viewing this thread

  • ... and 1 more.
    • Total: 22 (members: 8, guests: 14)

    Share this page

    Back
    Top Bottom