- Thread starter
- #21
Inspected the connector at the tranny and it looked good, no broken wires
I then removed the connector and saw a bunch of crap in the contacts.
I sprayed degereaser on it and took a wire brush and then brake clean on it and the contacts mounted on the tranny.
Wiped it all up and she started right up vs wouldn't before I tried the connector
Lets hope thats it. Didn't have a small file that could get down inside the contacts, got the top and probably a little bit inside with the brush plus cleaning the male part from the tranny
I am confused as to why it started before when I tapped the starter other than the slight mechanical movement at the connector caused by pounding the starter
I then removed the connector and saw a bunch of crap in the contacts.
I sprayed degereaser on it and took a wire brush and then brake clean on it and the contacts mounted on the tranny.
Wiped it all up and she started right up vs wouldn't before I tried the connector
Lets hope thats it. Didn't have a small file that could get down inside the contacts, got the top and probably a little bit inside with the brush plus cleaning the male part from the tranny
I am confused as to why it started before when I tapped the starter other than the slight mechanical movement at the connector caused by pounding the starter