Simple Sliders

[jb welda]

i got a question about that photo of the truck going up the falls.

a couple actually...

1) why? what was up there you had to get to?

2) once youre up, then what? how the hell do you get down?

just wondering and showing what goes through my mind when faced with an obstacle like that especially if i dont REALLY need to be up there...

one love
jah bill

 

[izuvice]

my simple sliders

View attachment 76893here are mine, 2x4x3/16 wall attached to the frame with 2x2x3/16 then tubed with 1.75 hrew tube

 

[FJ60_cruiser]

View attachment 76893here are mine, 2x4x3/16 wall attached to the frame with 2x2x3/16 then tubed with 1.75 hrew tube

now those are sweeeeet sliders!!!!!!!1 love them!! did you did it yourself?
how much do they cost you?

 

[izuvice]

yeah i did them myself, pretty easy really. took a couple of hours to build and costed right around 50 bucks or so.

 

[calphi27]

Yes, they are made of scedule 40 pipe, which I have had good luck with. I built this set with the same stuff/ same construction, and the 4runner frame actually bent inwards on the angle iron area as oppossed to the pipe bending. The "Waterfall" at Disney Oklahoma is not very kind on equipment!
I allways said that if I built another pair I would run angle iron all the way down the frame to stop this but there is not as much room to do that on the cruiser; especially on the driver's side. $35 Total cost

That is a mean section below the dam. I used to go out there all the time. Great place to crawl!!

 

[SCJO06]

i got a question about that photo of the truck going up the falls.

a couple actually...

1) why? what was up there you had to get to?

2) once youre up, then what? how the hell do you get down?

just wondering and showing what goes through my mind when faced with an obstacle like that especially if i dont REALLY need to be up there...

Well for one......what the F**K does it matter?

two this is a off road forum,we don't need any reasons of why we go up, down, or friggin sidways over all sorts of crap.

I hope that answers your questions.............now go hop in a jeep

 

[akarilo]

No plans, measure/cut.

 

[lunyou]

figured. thanks.

lunyou