SOLD Seat swap kit in WA

[SteelHunterFJ80]

Hello all,

I have two Audi S4 seats along with power wire harnesses and seat heater wire harnesses. The seat heater wire harnesses were ordered from Germany and are plug and play.

I bought these seats last year for but I've decided to go in a different direction. I fabbed up a seat brackets using some OEM seat feet that you'll get too. In other words, you'll have everything to do your own seat swap. The first pic below shows them installed and the leather looks really good.

Here are a couple links to other members who made the same swap:

what seats can I put in my Landcruiser

forum.ih8mud.com

Replaced the front seats in my LX450 with those of a 2013 Audi A6

Today I completed the installation of the Audi seats in my LX450. You can read the whole process here. Cheers

forum.ih8mud.com

Seats, harnesses, feet and one complete bracket all for $300 $200. Just need to copy the bracket I've made for the other side. Local pick up only.

Passenger side installed:

 

[SteelHunterFJ80]

 

[SteelHunterFJ80]

 

[SteelHunterFJ80]

 

[SteelHunterFJ80]

 

[ginericLC]

I'm either blind or there isn't a price?

 

[ginericLC]

Nevermind I found it. And the local pick up only.

 

[SteelHunterFJ80]

Nevermind I found it. And the local pick up only.

Well I only put local pick up only because I thought freight would be pretty expensive. But some mud members have cheap ways to get it sent them and I'm open to that.

Mostly I just want this to go to a nice land cruiser home. Done all the work to get it fitted and the proper hardware so it seems a waste to just dump it on Craigslist

 

[corbs]

Seats, harnesses, feet and one complete bracket

The US passenger side is the "complete" side?

 

[SteelHunterFJ80]

Yes so the drivers side needs to be copied from the passenger side. All you need to do is flip over the steel pieces I've already made and use them as a template and they'll fit the drivers side.

 

[SteelHunterFJ80]

Still available!

 

[SteelHunterFJ80]

Price drop!

 

[mindEASE]

Wrong coast but good deal. I need this type of setup. Looking to recover my fronts and that alone is $1k. This would be a no brained if you were closer.

 

[SteelHunterFJ80]

Wrong coast but good deal. I need this type of setup. Looking to recover my fronts and that alone is $1k. This would be a no brained if you were closer.

Thank you, the hard part is sourcing the feet to make the frame without destroying my old seats.

 

[SteelHunterFJ80]

Price drop! Need this gone, it's taking to room in my garage.

 

[SteelHunterFJ80]

2nd price drop!

 

[Miller605]

How much higher do These seats sit compared to the stock ones?

 

[SteelHunterFJ80]

At its lowest level maybe a half inch. Fully raised at least 3 inches. These seats offer more range of motion

 

[SteelHunterFJ80]

Sunday bump

 

[shocktower]

Sunday bump

How low can you go, I am about 3 hours away from you and I need seats