Bodean
Hot Damn
Heck no! The Lexus for the 4-runner
Samurai stretch, auto,doubler to dana 300, stickies
- Thread starter lenross1
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Nice. NICE.......
Dammit, I thought we were talking about the purdy truck! 
Bodean
Hot Damn
Update: The wife says it has to be sold so no trades allowed. She controls the ....
Dang, I thought you liked it at the Big Junk Run. I was showing off for you and everything!
Wait a minute here Fireman,
I believe Bodean said "finish the runner and then we'll talk"
Why do I get the feeling he's talking about the runner with 42's, mmh?
I believe Bodean said "finish the runner and then we'll talk"
Why do I get the feeling he's talking about the runner with 42's, mmh?
- Thread starter
- #507
Bumping this old thread to show the passenger seat is in and ready for action ! LOL
Sits a little higher in front due to the floor modification to fit the dana 300...but it's comfy.
Simple bracket to raise the front and match the height of the left side.
Crow Racing harness ordered.
Sits a little higher in front due to the floor modification to fit the dana 300...but it's comfy.
Simple bracket to raise the front and match the height of the left side.
Crow Racing harness ordered.
Bout dang time... Thought it was always going to be a one seater.
Looks great, Lenny. Glad to see you working on it again!
- Thread starter
- #510
Lol
I was waiting for ya to finish your shop ; )
Let's just say i was motivated to have this passenger riding me..
- Thread starter
- #511
Finally Rob and I tore down the buggy to see what I broke in Clayton last year.
Turns out the chattering noise and the inevitable sparks flying everywhere on the ride back to camp doing a neck snapping 30mph .. Turns out to be... A broken flexplate..
Used flexplate and spacers are in.
But I can't make the round up this year .. To much going on.
Turns out the chattering noise and the inevitable sparks flying everywhere on the ride back to camp doing a neck snapping 30mph .. Turns out to be... A broken flexplate..
Used flexplate and spacers are in.
But I can't make the round up this year .. To much going on.
jrob
Florence, MS
Good deal Lenny, happy to see you getting it going again!!
Used flexplate and spacers are in.
But I can't make the round up this year .. To much going on.
View attachment 1224135
It can be put back together in time if you want to make the Roundup
Is this little monster still around? Getting started on a weber swap and fuel cell in our 88. Would like to eventually stretch and link it, but for now it is mostly going to be mom's farm run about.
- Thread starter
- #515
Yep the Angry Squirrel is still kickin'.
Still deciding if want some more vroom vroom or fix the existing block motor mounting holes that i ripped out at Mardi Krawl.
They are great rigs to wheel.LIGHTWEIGHT.
Still deciding if want some more vroom vroom or fix the existing block motor mounting holes that i ripped out at Mardi Krawl.
They are great rigs to wheel.LIGHTWEIGHT.
More vroom vroom
You running the 1.3 or 1.6? And what vroom vroom would you upgrade to? VW diesel or a 16v or other?
I got a Toyota 2L diesel out in the shop...
Lenny once did an engine swap for 20hp and it still runs like it's carburated, damn thing goes where you point it though even if the motor is held in with ratchet straps
- Thread starter
- #520
I have a 1.6 8valve
Thinking about a 4.3 or a high hp zuk motor 2.0,2.3 or larger
may just say fawk it andjustdo a5.3 v8
ideally i would like a motorthat wikl bolt up to the Th180 transmission i have to keep the setup i am running now.
still doing research at a snails pace.
Thinking about a 4.3 or a high hp zuk motor 2.0,2.3 or larger
may just say fawk it andjustdo a5.3 v8
ideally i would like a motorthat wikl bolt up to the Th180 transmission i have to keep the setup i am running now.
still doing research at a snails pace.
