lol. maybe one day we'll work on getting that hitch out of that receiver. 
rebuilding of a 93 HJ75 Troopy
- Thread starter QsLC75
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #83
Driver light not working
Over Christmas my driver side headlight stopped working. I figured the bulb burnt out and would replace when I had time at home. This afternoon I tore apart the light housing and replaced both headlights (driver & passenger). The driver side still doesn't work; however, the driver side running lights & turn lights work. It appears that all 3 lights work off the same wires. I ran out of daylight, so I reassembled as is. Anyone have thoughts as to what I should check next when I have light to see in the engine bay?
Over Christmas my driver side headlight stopped working. I figured the bulb burnt out and would replace when I had time at home. This afternoon I tore apart the light housing and replaced both headlights (driver & passenger). The driver side still doesn't work; however, the driver side running lights & turn lights work. It appears that all 3 lights work off the same wires. I ran out of daylight, so I reassembled as is. Anyone have thoughts as to what I should check next when I have light to see in the engine bay?
i agree with Darin....get a cheap multimeter if you dont have one already
my connector on mine was shot recently. I would inspect the connector and see if there is any damage. I was able to get a pigtail connector from Napa for about $5. worth looking into.
- Thread starter
- #91
Here is the interesting part, before replacing both lights I had high beam on both lights. After replacing both lights, I still have high beam on both. But still no low beam on the driver side.
I agree with the suggestions of Connection or cut in the wire...
I agree with the suggestions of Connection or cut in the wire...
Aw, just high beam everyone. If they say something just tell them its a Cruiser thing, they would not understand.
And yes those days will work, let me do some chatting / research with someone.
And yes those days will work, let me do some chatting / research with someone.
R
No turbo.
Really like to know how many miles since it was built though. Alot of blow by.
Wayne, think its too much for valve seals. When i took the flex hose off right there it literally was dripping out. Alot of oil coming out of the tube coming from the valve cover.