Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
i tried that and they don't move inward
yes i took that out and the spider gears that where not on the axles
You should be able to tell if the axle is pushed in far enough just by looking at the end of the shaft in the diff. The c-clip should spin freely.
I had to remove the drums each side in order to push the axles in far enough to free the c-clips, but I think that was due to a limited slip spring pack that was in the way.