Prebuilt 200 build (2 Viewers)

[linuxgod]

Good luck at the hospital!

I have three kids. I figured out what causes them. Turns out it’s preventable

 

[clrussell]

Good luck at the hospital!

I have three kids. I figured out what causes them. Turns out it’s preventable

This is my 4th!

I know the solution as well

 

[clrussell]

40 engine died so we took the whale.
Overly impressed how good this thing wheels. I think we even convinced a couple Jeep folks

 

[grinchy]

40 engine died so we took the whale.
Overly impressed how good this thing wheels. I think we even convinced a couple Jeep folks

View attachment 3898227

View attachment 3898228

View attachment 3898229

View attachment 3898230

You bent a rear control arm with the armor? Shoot!

 

[clrussell]

You bent a rear control arm with the armor? Shoot!

She’s heavy. I should really put it on a scale.

I wasn’t exactly easy on it today. I believe that control arm was holding the rig at one point

 

[kcjaz]

Wow!” That’s impressive. Those guards have stopped my banana LCAs or maybe I’m picking lines better. @turbo8 , seen this from anyone else?

 

[clrussell]

View attachment 3898242

Wow!” That’s impressive. Those guards have stopped my banana LCAs or maybe I’m picking lines better. @turbo8 , seen this from anyone else?

I have seen one other and it was also a 200 somewhere it shouldn’t be.

 

[kcjaz]

I have seen one other and it was also a 200 somewhere it shouldn’t be.

200s belong almost everywhere. Just got back from Cruise Moab, a surprising number of 200s and 100s.

 

[turbo8]

View attachment 3898242

Wow!” That’s impressive. Those guards have stopped my banana LCAs or maybe I’m picking lines better. @turbo8 , seen this from anyone else?

Yeah, I have seen it happen on 2 other members 200's. The braces can only do so much before everything buckles. I talked about it after @prharper and @TN LX570 bent their control arms here and here

I made some stronger billet arms for mine but recommend the ones from Superior Engineering.

@clrussell if you are in a bind and need a used arm, I can send you one of my old ones with brace attached.

 

[tbisaacs]

Yeah, I have seen it happen on 2 other members 200's. They braces can only do so much before everything buckles. I talked about it after @prharper and @TN LX570 bent their control arms here and here

I made some stronger billet arms for mine but recommend the ones from Superior Engineering.
View attachment 3898268

@clrussell if you are in a bind and need a used arm, I can send you one of my old ones with brace attached.

I’m heading to Moab in 2 weeks. I’ll let you know how the superior ones hold up

 

[clrussell]

Yeah, I have seen it happen on 2 other members 200's. They braces can only do so much before everything buckles. I talked about it after @prharper and @TN LX570 bent their control arms here and here

I made some stronger billet arms for mine but recommend the ones from Superior Engineering.
View attachment 3898268

@clrussell if you are in a bind and need a used arm, I can send you one of my old ones with brace attached.

Thanks, I’ll probably just order a new one and replace the bent one. Assuming you can still source from Toyota.

It’s on daily duty but not traveling far this week.

 

[clrussell]

Not a bad spot

 

[clrussell]

Fuel run and sunsets on the way home from grandmas.

 

[TeCKis300]

Thanks, I’ll probably just order a new one and replace the bent one. Assuming you can still source from Toyota.

It’s on daily duty but not traveling far this week.

Absolutely can. Part number 48720-60070

Replacing all 5 links of my rear suspension at the moment, primarily to refresh the bushings.

 

[clrussell]

Absolutely can. Part number 48720-60070

Replacing all 5 links of my rear suspension at the moment, primarily to refresh the bushings.

View attachment 3904264

Thank you for the part number. I never got around to ordering last week

 

[MKDS]

Honestly can’t answer that. But I’ll make note to keep an eye on that.

Sorry for the quote - but I am curious about that as well and I am planning to add drawers in mine as well.
Did you have to adjust anything to the rear HVAC outlet being on the left side where your drawer sits? Did you notice any changes?

Thanks!

 

[clrussell]

Sorry for the quote - but I am curious about that as well and I am planning to add drawers in mine as well.
Did you have to adjust anything to the rear HVAC outlet being on the left side where your drawer sits? Did you notice any changes?

Thanks!

I did zero mods to anything hvac related. That’s been 70k ago and absolutely zero issues.

The drawer is my favorite interior modification. I don’t need two but not sure I could live without one.

 

[MKDS]

I did zero mods to anything hvac related. That’s been 70k ago and absolutely zero issues.

The drawer is my favorite interior modification. I don’t need two but not sure I could live without one.

Thanks for your quick reply!

 

[thecapedcapper]

I dig the Kaymar rear bar - and it looks like they can maybe be attached without a bumper too? Where did you get it?

 

[clrussell]

I dig the Kaymar rear bar - and it looks like they can maybe be attached without a bumper too? Where did you get it?

The swing out?

Long Range America is where I got mine.