Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Any luck finding that 3FE starter?Actually I think I do have one left. Will check tonight for you
100% forgot about it. headed to the shop in a few minutes and will look then and send a pic. sorry.Any luck finding that 3FE starter?
i have a ton of springs and stuff but i really suggest you go with an aftermarket kit. dobinson and ome make stock height springs that are going to ride much better than any 25 year old springs.Yo man what's good, any shocks and springs for my 97 I'm at stock height fwiw
No, I hauled the body off for scrap not long ago. Sorry manAny chance you have the wiring harness under the driver seat (82161-60031) from that 3FE?
No, I hauled the body off for scrap not long ago. Sorry man
Got a few. Send me message with what you need. Just a case or CDL, wiring harness ECT on it.transfer case for a 96 ?
50 plus the ride.How much for the driver’s side steering knuckle for a 1996 shipped to Houston? I need one asap! . Lmk
never seen a set in my entire time of doing this that isnt busted. pretty sure you can get them new from toyota still but might need to paint them to match.Any chance you have the inside Trim (called Garnish, Sliding Roof with Toyota) for the sunroof. The plastic bits that go around the frame. Specifically looking for the Tan Color or whatever color it is called.
never seen a set in my entire time of doing this that isnt busted. pretty sure you can get them new from toyota still but might need to paint them to match.
What did they run you and how did the paint turn out? I don't have a sunroof in mine but I get asked once a week for those parts so would be nice to tell people where to go and what paint to use.Bingo! Thanks for the quick response. I just got done painting the one I ordered from Toyota (Lt. Grey). You were my last resort in my search and prompted me to wrap it up. Turned out perfect and is now installed.
talking about the little triangle piece that goes inside the wheel well?Plastic end or corner cap for passenger rear bumper for a ‘97?