Part identification needed (2 Viewers)

[sandsfj40]

I’ve got what appears to be 2 mounting brackets from a 4-speed bell housing. Need confirmation on that and which one goes to the driver side.

 

[sandsfj40]

Also have this tube from a 8/71 F motor. Possible “oil pipe cooler”….SOR 055-07A? Does not match up with any of the holes on the side plate cover.

 

[Living in the Past]

Top two rear motor mounts. Other is retirn heater pipe that bolts to the side engine cover.

 

[sandsfj40]

Thanks. Again, which one goes to the driver side. The pipe does not match any bolt patterns on the side plate cover.

 

[mattressking]

Pipe is upper oil cooler hard pipe for a 2F. Bolts into 2F valve cover designed for oil cooler.

 

[RevISK]

Also have this tube from a 8/71 F motor. Possible “oil pipe cooler”….SOR 055-07A? Does not match up with any of the holes on the side plate cover.

View attachment 3487018

What @mattressking said is true. I had to remove mine as it had a bunch of pinholes. Just ran a soft line down to the OC. If you don’t have a need for it, I could use it.