OME 2863 springs?

[gearguywb]

I currently have a medium load lift on the 100 but this past fall, with a Slee bumper, sliders, cargo drawers, and a couple of passengers, the rear was definitely sitting lower. Looking for some heavier springs and looked at the ARB site.

Appears these would probably give 2 1/2" of lift with the load that I am carrying.

Any feedback on these springs or other options? I looked at the Slee springs as well.

Thanks!

 

[Trunk Monkey]

Search for 863 in title limited to the 100 section, found 5 threads that may have input.

 

[gearguywb]

Thanks! Searched for 2863 and not a lot of hits.

 

[fireball]

Howdy old HIH camp site neighbor!

I started with the Slee Heavy springs and then switched to the 863s once we got the rear bumper, drawers, etc all in the back. With everything fulled loaded for our trip to CO, we still had a bit of negative rake, so I've since added some 15mm spring spacers.

Here is a picture with everyone in the truck and all our gear loaded and the dog in the back:


Between the 63qt ARB, recovery gear in the drawers, and the 100# dog, I'd say our rear cargo area is about as heavy as can be!

 

[SmoothLC]

Try searching in Google like this:

 

[gearguywb]

863's it is! Going to order a set now...and wait until spring to put them on

 

[RobRed]

I made the progression... 860 to 863 to now 864

If your slee bumper happens to be a rear I would consider an 864 setup.

 

[bharris]

i have some unused 863s in my garage but would prefer slee heavies until i do drawer system. interested in a swap?

 

[DJWUZJ]

I made the progression... 860 to 863 to now 864

If your slee bumper happens to be a rear I would consider an 864 setup.

+1... I have seen the light

 

[gearguywb]

i have some unused 863s in my garage but would prefer slee heavies until i do drawer system. interested in a swap?

Thanks, but I ordered a set already. I will not put them on until spring. We have the LC in Colorado for the winter.