That one, it's near my home, saw it at $2500, started thinking.... But no time or space now for me.
Official ONSC member buying/selling thread (15 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
RedHeadedStepChild
Proudly wearing my MC1R mutation!
1988 HILUX DOUBLE CAB - $17499
on the Raleigh CL if anyone's interested - No affiliation
http://raleigh.craigslist.org/ctd/4907677167.html
on the Raleigh CL if anyone's interested - No affiliation
http://raleigh.craigslist.org/ctd/4907677167.html
jfz80
Cruisin’
CCC has some nice trucks and seems legit. In AZ
$1800 is a really tempting deal! I sent him the updated info, we'll see. I think he called the guy and became a little gun-shy when he was told that it needed to be towed back to Charleston and had "other issues".
I talked to the owner. Name is nate. Told me it was making a noise but definitely not a knocking sound. He thinks it's not running on all cylinders. I told him how to check it blah blah blah. I think you need to have someone with some knowledge check it out before even coming up to Charlotte. Sounds like he has distributor issues. Possibly timing and valves that need adjusting.
Unless you are interested I "a dent" of your own type experience. 
I would never recommend them.
jfz80
Cruisin’
Good to know care to expand ?
I thought they seem sketchy at first working out of a loading dock bay and advertising cross country I had just seen a few folks on mud an expo pleased with their transactions.
I thought they seem sketchy at first working out of a loading dock bay and advertising cross country I had just seen a few folks on mud an expo pleased with their transactions.
This looks like a really nice project 40. Fresh paint, new steel, Vintage Air, new glass, etc. @coinoperated40 knows the guy. Maybe he will chime in. I was thinking about it so I responded to the ad and got the guy's phone number. Haven't been by to check it out though... He's down near me so if anyone wants me to go look at it for them, let me know. I'd be glad to.
http://charlotte.craigslist.org/cto/4900452489.html
http://charlotte.craigslist.org/cto/4900452489.html
I believe his name is Dave. Still have his address from when I went looking for parts a couple years back. I did take and post a few pictures of the 40 back then. Looked like a project that just took to long to finish, like a lot of them. He was thinking of selling back then, but wanted to finish up a few things. Didn't really check it out to much.
Shane
Pictures in this post. Second page https://forum.ih8mud.com/threads/another-guy-from-charlotte-area-looking-for-a-forty.728289/page-2#
Pictures from April 2013
Last edited:
I have seen a few of their trucks in person. If anyone wants to know more talk to me off line. Not talking about it on here.
Sorry if this is a repost ... just surfing and sipping coffee.
V8 FJ80:
http://tricities.craigslist.org/pts/4902493475.html
V8 FJ80:
http://tricities.craigslist.org/pts/4902493475.html
Selling a 1984 FJ60 for a guy I know through work, obviously I will post more pictures when I get a chance to go look at the vehicle or can request more detailed pictures. Just let me know and I can work out a time for someone to take a look at the vehicle, test drive, etc.
Most work was professionally done by Iron Pig Off Road.
1984 FJ60
5-Speed H55F (Installed new)
Marlin Crawler 4.70:1 toybox (installed new)
Split-case x-fer case
Twin-stick from George (orangefj45)
4.11 diffs
ARB air-lockers
ARB air compressor
Safari Snorkle with Donalson pre-air filter box and Australian-spec air-filter box from SOR
2F engine runs excellent; 149,700 miles;
Head rebuild by Simon (Tyson Automotive Machine), 4-angle grind, etc. (3,000 miles ago)
Carb rebuilt by Marks Offroad, Dissy recurved by Jim Chenoweth, desmogged
New head gasket, new water-pump, etc.
Man-a-fre ceramic coated tuned headers, 2-into-Y system
Magnaflow muffler with 2.5” cat-back system
OME Heavies lift
ARB Front Winch Bumper w/ shackles, powder-coated
IPOR custom-made Rear Bumper, spare-tire mount, hitch, ladder, shackles, power-coated
IPOR custom sliders welded to frame, powercoated
IPOR custom rock-protector bottom plate, heavy-duty, weights about 100 lbs!
Hi-lift Xtreme Jack
IPF lights
LED cabin lights
Warn 8254-50 Winch (installed new; since water leaked in it, replaced with new motor & Albright solenoid & resealed)
12Volt-Guy Winch controller inside the cab
Dual-battery setup with IPOR solenoid setup, you can self-jump with one click if the main battery is drained.
Alpine Stereo w/Bluetooth Phone and iPhone connection
10” Kicker Subwoofer
4 Jenson speakers
(5) Mickey Thompson Baja MTZ 33x12.5x15
(5) 15x8 Black Wheels, 3.25 B/S, powder-coated
Front Procomp reclining bucket seats (not pictured)
Seat covers
Chest seatbelts installed for the rear passengers also
Repainted by the previous owner a few years ago.
All fluids were drained and replaced; hubs and birfields repacked, etc.
Needs Work:
There are 3 smalls spot with rust bubbles. I grinded them down to bare metal and primed them for now. I will try to take pictures of those.
The gas door lock is missing but I still got the lock cylinder.
The original carpet is still there but would be nice to have new carpet installed
Located in Raleigh
Asking $15,000
Most work was professionally done by Iron Pig Off Road.
1984 FJ60
5-Speed H55F (Installed new)
Marlin Crawler 4.70:1 toybox (installed new)
Split-case x-fer case
Twin-stick from George (orangefj45)
4.11 diffs
ARB air-lockers
ARB air compressor
Safari Snorkle with Donalson pre-air filter box and Australian-spec air-filter box from SOR
2F engine runs excellent; 149,700 miles;
Head rebuild by Simon (Tyson Automotive Machine), 4-angle grind, etc. (3,000 miles ago)
Carb rebuilt by Marks Offroad, Dissy recurved by Jim Chenoweth, desmogged
New head gasket, new water-pump, etc.
Man-a-fre ceramic coated tuned headers, 2-into-Y system
Magnaflow muffler with 2.5” cat-back system
OME Heavies lift
ARB Front Winch Bumper w/ shackles, powder-coated
IPOR custom-made Rear Bumper, spare-tire mount, hitch, ladder, shackles, power-coated
IPOR custom sliders welded to frame, powercoated
IPOR custom rock-protector bottom plate, heavy-duty, weights about 100 lbs!
Hi-lift Xtreme Jack
IPF lights
LED cabin lights
Warn 8254-50 Winch (installed new; since water leaked in it, replaced with new motor & Albright solenoid & resealed)
12Volt-Guy Winch controller inside the cab
Dual-battery setup with IPOR solenoid setup, you can self-jump with one click if the main battery is drained.
Alpine Stereo w/Bluetooth Phone and iPhone connection
10” Kicker Subwoofer
4 Jenson speakers
(5) Mickey Thompson Baja MTZ 33x12.5x15
(5) 15x8 Black Wheels, 3.25 B/S, powder-coated
Front Procomp reclining bucket seats (not pictured)
Seat covers
Chest seatbelts installed for the rear passengers also
Repainted by the previous owner a few years ago.
All fluids were drained and replaced; hubs and birfields repacked, etc.
Needs Work:
There are 3 smalls spot with rust bubbles. I grinded them down to bare metal and primed them for now. I will try to take pictures of those.
The gas door lock is missing but I still got the lock cylinder.
The original carpet is still there but would be nice to have new carpet installed
Located in Raleigh
Asking $15,000
FJ45 Troopy just outside of Columbia, SC. $$$$ but you don't see these very often: http://charlotte.craigslist.org/cto/4876049954.html
Posting for a friend, but don't know anything about it yet.
1970 International Scout 800A. Doesn't run, sitting 7 years.
PM if any interest and I will get some pictures. No idea on price.
In the Charlotte area.
Thanks
Shane
1970 International Scout 800A. Doesn't run, sitting 7 years.
PM if any interest and I will get some pictures. No idea on price.
In the Charlotte area.
Thanks
Shane
I've got 9 of them (10 actually but one has a broken end). One is yours. The gnomes thank you for taking inventory off their hands...
I've heard of hoarding ammo but dayum dude. Tell the gnomes thanks. If someone from the triad is headed to the M&G perhaps that is a viable mud ship plan.
Again, THANKS!
Rice
Well, I was getting something from R.K a few years ago, and not all of his stash went to Marshall. There was some leftovers that came home with me. I'll make sure it gets to someone who can get it to the M&G.
