S4Cruiser
SILVER Star
I have some - both fronts and rears.
Edit - not sure on the headrest for the rear seats. I can check tomorrow if you would like.
Official ONSC member buying/selling thread (9 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I have some - both fronts and rears.
Edit - not sure on the headrest for the rear seats. I can check tomorrow if you would like.
Let me know how much you want for it and if you could PM me some pictures that would be helpful. Thanks
NCFJ
Supporting Vendor
I have no photos, its in a storage container if it is still around
40LandCruising
Anderson
I would appreciate that.
https://raleigh.craigslist.org/spo/d/land-cruiser-lexus-lx470/6616516395.html
100 Floor Mats - Weathertech
100 Floor Mats - Weathertech
sleepycruiser
I will get by….I will survive -Touch of Grey LC200
Who is over that way in Raleigh and could get them for me and arrange a Mudship later? He is close to 540.
He said he would take $200...
Last edited:
NCTrey133
@Sweet_Brown_80
CVT RTT, Frontrunner Rack, Locked front axle, Rear Seats (96 lx450) & Rear Locker Actuator
Posting up my roof rack & my RTT for sale in case anyone is interested! I'm just not using the RTT.
Got a CVT Mt. Ranier w/ the Annex added on (Annex fits in under the ladder). Used 3 times - $1,000.00
Got a Front Runner Slimline 2 80 series rack. Been on the truck for 1 year, had a RTT on it 3 times - $850.00
Here is a pretty good shot of the tent deployed, I don't have the side shot of it but this is a 3 person larger tent. 2 sleep amazing in there, able to roll and nobody is touched.
Here is a better shot of the rack:
Selling my spare front axle I was going to use for a 3 link project - $700
- Locked w/ actuator
- Rotors likely need replacing
- ABS sensor removed on drivers side
Also have:
- Rear seats (not the 3rd row seats, the 2nd row rear seats) $100
- - - > No cracks! In good condition. Will load pics when I get home.
- Rear locker actuator (stopped working, will need rebuild) $100
- - - > Will load pics when I get hom.
I'm located in Burlington NC
Posting up my roof rack & my RTT for sale in case anyone is interested! I'm just not using the RTT.
Got a CVT Mt. Ranier w/ the Annex added on (Annex fits in under the ladder). Used 3 times - $1,000.00
Got a Front Runner Slimline 2 80 series rack. Been on the truck for 1 year, had a RTT on it 3 times - $850.00
Here is a pretty good shot of the tent deployed, I don't have the side shot of it but this is a 3 person larger tent. 2 sleep amazing in there, able to roll and nobody is touched.
Here is a better shot of the rack:
Selling my spare front axle I was going to use for a 3 link project - $700
- Locked w/ actuator
- Rotors likely need replacing
- ABS sensor removed on drivers side
Also have:
- Rear seats (not the 3rd row seats, the 2nd row rear seats) $100
- - - > No cracks! In good condition. Will load pics when I get home.
- Rear locker actuator (stopped working, will need rebuild) $100
- - - > Will load pics when I get hom.
I'm located in Burlington NC
All,
I appreciate everyone that has helped with either advise, technical knowledge, or just moral support with the pig. The Niland household has unfortunately been dealt some financial setbacks recently. We have had about $10k is unplanned expenses this spring, and we found out not too long ago that our foundation will require about the same in repairs.
The pig has come a long way, but it still has a ways to go. I cant in good conscious keep putting money into it, when their are more important priorities on the home front. When I bought the truck sight unseen I was told it just needed a new clutch. This turned out to be far from the truth, and I quickly reached, and exceeded my project budget.
I would like to keep this truck local and in the club so I will start a FS thread in ONSC first. If it doesn't sell here, ill post it in the general classified forum. I am
asking $4,250 for the truck and all the spare parts. I will have more details in the FS thread but if anyone is interested, please let me know. I have been struggling with this decision for a week or so, but it is the right thing to do for the family.
Details:
Truck is a 1971 with a 78 engine and transmission. It also has a front axle with disc from a 79. @NCFJ rebuilt both front and rear axles, new rotors, shoes, pads, cylinders, etc. All steering ends have been replaced the steering relay rod with one with serviceable ends. The carb was rebuilt by Jim C, it has a new fuel pump, clutch slave cylinder, rebuilt ebrake with new cable.
Known issues. Its rusty, It needs a new brake master cylinder, its rusty, it has not been baselined, it is missing an air filter nut and carb stud, its rusty. The rear gate handle is broken, and the lock is missing. It also comes with a few spare parts and a new 4speed clutch kit. Please let me know if you have any questions.
I appreciate everyone that has helped with either advise, technical knowledge, or just moral support with the pig. The Niland household has unfortunately been dealt some financial setbacks recently. We have had about $10k is unplanned expenses this spring, and we found out not too long ago that our foundation will require about the same in repairs.
The pig has come a long way, but it still has a ways to go. I cant in good conscious keep putting money into it, when their are more important priorities on the home front. When I bought the truck sight unseen I was told it just needed a new clutch. This turned out to be far from the truth, and I quickly reached, and exceeded my project budget.
I would like to keep this truck local and in the club so I will start a FS thread in ONSC first. If it doesn't sell here, ill post it in the general classified forum. I am
asking $4,250 for the truck and all the spare parts. I will have more details in the FS thread but if anyone is interested, please let me know. I have been struggling with this decision for a week or so, but it is the right thing to do for the family.
Details:
Truck is a 1971 with a 78 engine and transmission. It also has a front axle with disc from a 79. @NCFJ rebuilt both front and rear axles, new rotors, shoes, pads, cylinders, etc. All steering ends have been replaced the steering relay rod with one with serviceable ends. The carb was rebuilt by Jim C, it has a new fuel pump, clutch slave cylinder, rebuilt ebrake with new cable.
Known issues. Its rusty, It needs a new brake master cylinder, its rusty, it has not been baselined, it is missing an air filter nut and carb stud, its rusty. The rear gate handle is broken, and the lock is missing. It also comes with a few spare parts and a new 4speed clutch kit. Please let me know if you have any questions.
Last edited:
Want to Buy:
100 Series front bumper cover - Gray
100 Series front skid plate
Located in NC if possible. Thank you!
100 Series front bumper cover - Gray
100 Series front skid plate
Located in NC if possible. Thank you!
jfz80
Cruisin’
Considering selling the Tundra (2005, 170K) and going for a 2nd Gen Access Cab TRD Off Road Tacoma. Tired of the wide turning radius and long body. Kid is off to college so don't NEED the double cab anymore. Would prefer a smaller stock Tacoma for back and forth to work
All said - Pearl is a wonderful truck. Rides like a 70s Cadillac and is capable off road. 37" of rear leg room, etc.
I can remove stuff from her as needed if you have interest.
Has to keep the sliders (welded on). I can possibly swap tires/wheels, remove dual battery stuff, etc.
Build thread is below.
All said - Pearl is a wonderful truck. Rides like a 70s Cadillac and is capable off road. 37" of rear leg room, etc.
I can remove stuff from her as needed if you have interest.
Has to keep the sliders (welded on). I can possibly swap tires/wheels, remove dual battery stuff, etc.
Build thread is below.
jfz80
Cruisin’
Paging @BoostRetard which is pointless so ill ask him for you.
40LandCruising
Anderson
Well, as my luck would have it, I need more glass for the 80. My friend tried to kill the horsefly from hell today and ended up punching my windshield, unfortunately breaking it and not even killing the giant fly.
So I need a front Windshield for a 1994 FZJ80
So I need a front Windshield for a 1994 FZJ80
NCTrey133
@Sweet_Brown_80
4x4 Labs Dual Swingout
PM me, I have a contact who is parting out his 80 in Pittsboro. I can grab that glass for you.
PM me, I have a contact who is parting out his 80 in Pittsboro. I can grab that glass for you.
I have lots and lots of 80 parts, including windshields. And more glass if your friend sees a horsefly again.
NCTrey133
@Sweet_Brown_80
Update on my for sale list:
4x4 Labs Dual Swingout Rear Bumper - 2 gas cans + tire carrier - $1650
CVT RTT - Mt. Ranier w/ Annex - King Size Bed - Used 3 times - $1000
Front Runner 80 Series Slimline II Rack - $850
Locked Front 8" HP Axle for 80 Series - Missing driver ABS sensor - Rotors need replacing - $700
Rear Seats (not 3rd row) - No cracks - Good condition - $100
Rear Locker Actuator - Just pulled it off my axle, needs re-build - $100
Here is a picture of the rear bumper:
Let me know if you have any questions!
Thanks,
Trey
4x4 Labs Dual Swingout Rear Bumper - 2 gas cans + tire carrier - $1650
CVT RTT - Mt. Ranier w/ Annex - King Size Bed - Used 3 times - $1000
Front Runner 80 Series Slimline II Rack - $850
Locked Front 8" HP Axle for 80 Series - Missing driver ABS sensor - Rotors need replacing - $700
Rear Seats (not 3rd row) - No cracks - Good condition - $100
Rear Locker Actuator - Just pulled it off my axle, needs re-build - $100
Here is a picture of the rear bumper:
Let me know if you have any questions!
Thanks,
Trey
