What are your specs hotwod? Things I'd like to know lol: rim size/width, type of lift, how much lift. etc. Much Thanks!39.5's! (40's to make things easier)
--Pam
Official 37" and up picture thread (2 Viewers)
- Thread starter slow91fj90
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
--Pam
Oh sh!t sorry. I have a custom 3-link. Pretty much the same as ActionJackson's setup. 7" TJM Coils, 14" travel ProComp 9000's. Wheels are ProComp Rock Crawlers with Custom Real/Fake Beadlocks (16x8x2.5BS), Irok Radial 39.5x13.5x16
Just went from 6 to 12.39.5's! (40's to make things easier)
Took me a while but I can finally post in this thread!
37x13.50/17 Nitto Mud Grapplers
3.5" F.O.R. lift w/ 1" lift spacers for added weight
1.5" wheel spacers all around
17x9 Level 8 "Strike 6" wheels, -12mm offset, 4.5" backspace
Trimmed 3" from front fender, notched inner fender to match. Will trim the rear in the near future
37x13.50/17 Nitto Mud Grapplers
3.5" F.O.R. lift w/ 1" lift spacers for added weight
1.5" wheel spacers all around
17x9 Level 8 "Strike 6" wheels, -12mm offset, 4.5" backspace
Trimmed 3" from front fender, notched inner fender to match. Will trim the rear in the near future
Considering trading my set up. Will 15" wheels clear the rotors?
Considering trading my set up. Will 15" wheels clear the rotors?
With some grinding to the calipers...
Tapage
Club 4X4 Panamá
or wheel spacers .. or some of both ..
The grinding on the rear calipers is pretty deep. I almost quit for 'safety' reasons just before they fit(15" 4.5" bs steelers on ff rear). Anymore and I thought I was gonna ruin their integrity
Got any pics? Im wanting to go down to a15x12 but thecwork required in the rear has me 2nd guessing it.
37/14.5/15 Toyo Open Country MT
15x10 Verio Ultra's
Pre 94 HDJ81 small rear brakes
6" Ironman lift
To Do,
Metaltech rear arms
Front Driveshaft
Custom front radius arm mounts to move the arms forward and down
Trimming
Literally just finished it so it was driveable this weekend. I daily drive it.
15x10 Verio Ultra's
Pre 94 HDJ81 small rear brakes
6" Ironman lift
To Do,
Metaltech rear arms
Front Driveshaft
Custom front radius arm mounts to move the arms forward and down
Trimming
Literally just finished it so it was driveable this weekend. I daily drive it.
lumbee1
Native American
Bump...
37×12.5r17 Procomp Xtreme MT2'S
SLee 6" lift springs (probably sagging a bit)
4.88 gears.
Need to extend bump stops bad, thought I was going to destroy my tires this weekend.
SLee 6" lift springs (probably sagging a bit)
4.88 gears.
Need to extend bump stops bad, thought I was going to destroy my tires this weekend.
I can play. 365/75R16's
Is that like a 37x13.5" ish?I can play. 365/75R16's
What lift?
Short 38"
365/75R16
Diameter : 37.6"
Width : 14.37"
Wheel : 16"
Circumference : 118.1"
Revs/Mile : 536
MMV
http://tire-size-conversion.com/tiresizes/365-75R16.htm
I still need to regear. But all in the loss of power wasn't as extreme as I thought it would be. I have a set of 4:88's and RCV axles ready to go in.
38 inch swampers on chains.
Any more photos of that rear bar?
