Project FJ60 would start and run.
I was bending brake line by front axle and a loose ground on frame touched the positive wire going to the starter. Now I have no power to the dash and battery is at 12.9V
First thought is fusible link, but I can’t seem to find one. I’ve checked all fuses on inside panel, I have not checked relays as I don’t know where to start with that.
One thing to note, previous owner may have removed fusible links (or please help me find them)- also he installed some sort of switch on dash- I have no idea what it is, but the fuse running to it didn’t blow.. and it didn’t seem to effect starting before this happened
I was bending brake line by front axle and a loose ground on frame touched the positive wire going to the starter. Now I have no power to the dash and battery is at 12.9V
First thought is fusible link, but I can’t seem to find one. I’ve checked all fuses on inside panel, I have not checked relays as I don’t know where to start with that.
One thing to note, previous owner may have removed fusible links (or please help me find them)- also he installed some sort of switch on dash- I have no idea what it is, but the fuse running to it didn’t blow.. and it didn’t seem to effect starting before this happened