ARCHIVE New EXPO Modular Front Bumper Design (1 Viewer)
- Thread starter UnderDawg
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
UnderDawg
Wannabe welder
- Thread starter
- #346
I got a ton of new stuff with this bumper to show you guys. Its reached 100 percent in fit and finish. I have a new rack design to show and tread plates redone. I've got 1 expo bumper ready to go. Price for bumper with full bull bar is $1100.00 that also includes powder.
Thanks for the texts and calls guys I appreciate your concern but I've just been nose to the grind stone trying to get as much going as I can. I just sat down about 30 mins after a shower and a big bowl of Capt. Crunch. catching up on emails and communications.
Had a interesting interaction with someone very well know in the Cruiser community. Not gonna say who just yet but what a gentlemen and a true car geek. I'm getting really excited to see how far I can take this. Once I get my building up and I have room to breath I'll be looking for a couple of distributors. I'll have a 40x40' section for warehouse and shipping.
So things are looking great and I'm excited to see what the next day brings.
Thanks for your continued support and business.
Thanks for the texts and calls guys I appreciate your concern but I've just been nose to the grind stone trying to get as much going as I can. I just sat down about 30 mins after a shower and a big bowl of Capt. Crunch. catching up on emails and communications.
Had a interesting interaction with someone very well know in the Cruiser community. Not gonna say who just yet but what a gentlemen and a true car geek. I'm getting really excited to see how far I can take this. Once I get my building up and I have room to breath I'll be looking for a couple of distributors. I'll have a 40x40' section for warehouse and shipping.
So things are looking great and I'm excited to see what the next day brings.
Thanks for your continued support and business.
LFD2037
TEXAS LEXUS!
Pics or it didn't happen
UnderDawg
Wannabe welder
- Thread starter
- #349
Here ya go
Uncleaned weld
Got rid of the center bar out on the ends. I just didnt like the way it looked so ...
I have a center cover that bolts on from the underside. I'll find you guys a pic of it
More pipe welds
Sleeved recovery holes
After the first grind
Me getting my grinding on
Winch cover with the same bevel I put on all the bumpers outside corners
Winch cover
Uncleaned weld
Got rid of the center bar out on the ends. I just didnt like the way it looked so ...
I have a center cover that bolts on from the underside. I'll find you guys a pic of it
More pipe welds
Sleeved recovery holes
After the first grind
Me getting my grinding on
Winch cover with the same bevel I put on all the bumpers outside corners
Winch cover
UnderDawg
Wannabe welder
- Thread starter
- #350
More
Some beads
Sneak peak of the new rack
Things got a little screwy but we managed to get worked out.
All remaining bits of the screw were ground down and smoothed out.
Tread plates I mentioned about 4 months ago...
TIIIIIGGGHHTT!!!!!
Im all caught up on bumpers guys so I'll be excepting 5 new bumper orders!!!!
Some beads
Sneak peak of the new rack
Things got a little screwy but we managed to get worked out.
All remaining bits of the screw were ground down and smoothed out.
Tread plates I mentioned about 4 months ago...
TIIIIIGGGHHTT!!!!!
Im all caught up on bumpers guys so I'll be excepting 5 new bumper orders!!!!
Niiiiiiiiiiiiiiiice!
UnderDawg
Wannabe welder
- Thread starter
- #352
I have one front bumper ready to ship tomorrow!!!!
$1100.00 plus shipping on a pallet. I'll throw in the 1/4" skid plate for free ($200.00)
All hardware included
I could really use a couple of orders as of now due to a couple of customers bailing on me at the last minute.
Thanks guys
Jason
$1100.00 plus shipping on a pallet. I'll throw in the 1/4" skid plate for free ($200.00)
All hardware included
I could really use a couple of orders as of now due to a couple of customers bailing on me at the last minute.
Thanks guys
Jason
Last edited:
UnderDawg
Wannabe welder
- Thread starter
- #353
Check me out on Facebook here's my new page
https://www.facebook.com/pages/UnderDawg-Fab-Worx/1507256536220996
Like and share please get the word out. Jonathon Ward from Icon TLC liked my page the other day... I was encouraged to call his office and speak with a rep from his company. Scared me to death... not really.
I've spoke to a couple of really great guys with shops that wanna sell my stuff and become distributors. All this in only a few short months. Looking forward to next year and seeing this company grow and expand. I pride myself on quality in design and function. It way take me longer to get there but when I do its gonna be quality. Sorry a couple of you didnt understand that. I tried to explain this more than once here on the boards. I dont hold it against you though, dealing with a new company is scary in some ways. Not knowing whats in the heart of the man behind the business or understanding their mission.
My mission is simple really,
I wanna make the best American made off road parts available. Thats it.
More new stuff to come, pintle swing down tire carrier and rear bumper for the 80 series are next.
Jason
https://www.facebook.com/pages/UnderDawg-Fab-Worx/1507256536220996
Like and share please get the word out. Jonathon Ward from Icon TLC liked my page the other day... I was encouraged to call his office and speak with a rep from his company. Scared me to death... not really.
I've spoke to a couple of really great guys with shops that wanna sell my stuff and become distributors. All this in only a few short months. Looking forward to next year and seeing this company grow and expand. I pride myself on quality in design and function. It way take me longer to get there but when I do its gonna be quality. Sorry a couple of you didnt understand that. I tried to explain this more than once here on the boards. I dont hold it against you though, dealing with a new company is scary in some ways. Not knowing whats in the heart of the man behind the business or understanding their mission.
My mission is simple really,
I wanna make the best American made off road parts available. Thats it.
More new stuff to come, pintle swing down tire carrier and rear bumper for the 80 series are next.
Jason
bumper looks great...rack is nice and flat too, exactly what I would build for that piece. Excited to see the rear bumper!!
Phares
Mostly Useless
Welds and pipe fitment looks great!!! Keep your head up and keep building the dream!
hamishpotter
SILVER Star
Looking great - nice work!
UnderDawg
Wannabe welder
- Thread starter
- #357
Thank you gentlemen. Im back on the couch again with burnt up eyes. Gotta get a new helmet. .. even though I just bought that sweet skull autoarc. .. its flashing me. Every time I have a heavy day of welding it burns me up. Gonna get a regular flip down full view helmet screw these autos. Sorry if I was spos to call or email... I cant see. Got a couple more ready to go...
Similar threads
