Wanted NEEDED===> H55F Transmission mount <=====

[In2cruisers]

In searh of a H55F transmossion mount in good condition

My rig is a BJ75 but Im thinking the H55f mount is universal for all X members 40, 60 and 70s.....please speek up if im WrOnG ?

 

[RufusTheDufus]

I think the 40 and 60 series are the same with an angled cross member mounting location. I think the 70 series has a flat bottom.

 

[lowenbrau]

I think the late 60s might have had the flat bottom as well. They weren't too expensive from the dealer, last I checked.

 

[OGBeno]

Don't skimp on a used transmission mount. Buy a new one.

12371-58021 Available from any clown working a Toyota parts desk these days.

 

[Splangy]

I think the late 60s might have had the flat bottom as well. They weren't too expensive from the dealer, last I checked.

Flat bottoms started at the end of (July?) 1985 production for all 60 & 70 series.

 

[In2cruisers]

Don't skimp on a used transmission mount. Buy a new one.

12371-58021 Available from any clown working a Toyota parts desk these days.

Don't know if this is the correct part number....mine has 2 studs that go thru the trans X member, and Yes...flat bottomed.

My Yota parts guys.....although very nice........ can't find s#£¥ for anything diesel or (non-us)

 

[Splangy]

Don't know if this is the correct part number....mine has 2 studs that go thru the trans X member, and Yes...flat bottomed.

My Yota parts guys.....although very nice........ can't find s#£¥ for anything diesel or (non-us)

It's not a non-USA part. It's the same mount used on US 4-speed trucks. If it's completely flat on the bottom, you'll need a mount from a 1986 or newer. Just tell him you have a 1987 FJ60. I can confirm the part number later.

 

[In2cruisers]

Cooooool