- Thread starter
- #161
Transfercase Nosecone Seal and Boot. Installing this seal and boot was pretty straightforward
Last edited:
My Jan 81 FJ40 Frame Off Resto Mod (1 Viewer)
- Thread starter KY Longhunter
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Sure thing, although it is not stock. It is a very close match.
I also have the original rear crossmember I chose to remove as PO apparently hooked tow strap to it and bent it all to hell.
I shouldn't have that problem with this one as it is about 1/4" thick.
I have the exact same problem with the crossmember.
I'm not looking for stock bumpers anyways, just like the looks og this one and would appreciate the dimensions so i could make a copycat
Improvising enough already so some dimensions would be nice for at least one part
- Thread starter
- #163
Klaufi...I have measurements but left them in shop. Will post them up tomorrow.
Leave you with some pics of my 70's aprons. Yes, I know shouldn't go on an 81 but I just like them so much I did it anyway. Found the aprons on eBay and the lights here on mud classifieds
Leave you with some pics of my 70's aprons. Yes, I know shouldn't go on an 81 but I just like them so much I did it anyway. Found the aprons on eBay and the lights here on mud classifieds
Damn that looks good.
- Thread starter
- #165
Came up with a name for my rig. New name is officially "Sarge."
- Thread starter
- #166
3/16" guage rear crossmember
60 3/4" L x 4" H (o.d.) x 3 1/4" W (Top Edge)
When I say top edge I'm referring to the side that rear tub mounts to. Mine was originally only about 2 1/4" and I had to add 1" to accomodate body mounts.
Bottom Edge sould be 2 1/4".
what suspension/ and or lift are u running and did you have to put spacers on?
looks grreat
Rob
looks grreat
Rob
- Thread starter
- #168
Thanks!
2.5" OME Dakars. I suspect it will settle with time.
17x8 rims with 285/70 KM2's
No spacers yet but haven't driven a mile on them yet either. No real experience yet.
Alex
great, I just bought AEV 17 x 8 rims that I want to install and I am running 2.5" OME heavys and like the look of yours, what is approx measurement in inches in width and height? I was wanting something right around 33 x 11-12"
thanks
Rob
thanks
Rob
- Thread starter
- #170
I can pull a tape on them later but I believe that is exactly what it measures out to .... 33 x 11.50
There are some conversion calculators on the web ive used before.
cool, perfect!!
thanks
R
thanks
R
- Thread starter
- #172
thanks brother, that is all me, perfect
R
R
- Thread starter
- #174
Need a return favor. Should my tub be flush with rear crossmember or stick out past the rear crossmember or vice versa? Anybody know?
I'm trying to find home before securing tub to frame.
I'm trying to find home before securing tub to frame.
i am not near my vehicle, but I believe it to be flush pretty much,
R
R
Currently working on it, it needs to be flush.
Nice job your doing.
Nice job your doing.
Awesome Build
Awesome build, thanks for sharing really gives me some inspiration on my bucket of rust and bolts.
You'll be "Cruising in Style" in no time.
Thanks for all the info on specific resources.
Awesome build, thanks for sharing really gives me some inspiration on my bucket of rust and bolts.
You'll be "Cruising in Style" in no time.
Thanks for all the info on specific resources.
- Thread starter
- #180
No, still haven't worked out title. May have to spend some $$$ and use mainelytitles.com or plead with PO to order duplicate title.
Waiting to get it running as I will need to get it inspected by local Sherrif's office first.
