My FJ60 needs a rear tire carrier bumper. Suggestions? (2 Viewers)

[OuraySimba]

I’m looking for suggestions on vendors who sells rear tire carriers for FJ60’s. I’ve seen a couple with Jerry can s racks and the wheel off to the side. I’ve also seen a center mount. I think it would be a good upgrade.

 

[boerboel313]

4X4Labs labs.
Can take better pics if you like.

 

[tucson_sailors]

Wow. I know what my 60 wants to be when it grows up.

 

[landcruiserjunky]

The build your own kit from fourrunner:

FJ60/62 Rear Bumper Kits

 

[upperblack]

4 plus and love it.
There is a built in jerry can holder behind the ladder

 

[boerboel313]

4 plus and love it.
There is a built in jerry can holder behind the ladder

View attachment 1794968

Upperblack, Does that ladder swing down? If so, can it be attached to any bumper or is it welded on the swing arm?
Can I see close up of connection points and deployment mechanism?

 

[aviafx]

Upperblack, Does that ladder swing down? If so, can it be attached to any bumper or is it welded on the swing arm?
Can I see close up of connection points and deployment mechanism?

Many more details and photos here on that expedition 4plus bumper!

 

[Hojack]

Those are expensive. I’d like to build my own after my swap.

 

[boerboel313]

4 plus and love it.
There is a built in jerry can holder behind the ladder

View attachment 1794968

Many more details and photos here on that expedition 4plus bumper!

txs

 

[upperblack]

Many more details and photos here on that expedition 4plus bumper!

Contact Dave @lcwizard - he does mud member discounts.

 

[upperblack]

Upperblack, Does that ladder swing down? If so, can it be attached to any bumper or is it welded on the swing arm?
Can I see close up of connection points and deployment mechanism?

Yes there is a lower section that swings down. Makes using it much easier plus the design is really cool. It’s plate style vs tube there is not one on the 4 plus site. I think it was one of the first one in this style that Dave built.
The ladder bolts on to the jerry can holder which bolts onto a platform.
Maybe these pics help - it's what I have on my iPad but happy to take any pics you'd like to see

 

[boerboel313]

Very nice .

 

[ceylonfj40nut]

^^^^ 4 plus. Dave’s stuff is awesome.

 

[brooksfj60]

View attachment 1794899 View attachment 1794900 View attachment 1794901 4X4Labs labs.
Can take better pics if you like.

Love those Flags and Rig.

 

[boerboel313]

Love those Flags and Rig.

Thank you.

 

[brooksfj60]

My son is stationed at Pendleton.

 

[augirthedude]

Hopefully 4+ has improved their steel prep prior to powder coating. All the paint peeled off mine within 2 years. In comparison my ARB front bumper paint is fine after 15 plus years.

4 plus and love it.
There is a built in jerry can holder behind the ladder

View attachment 1794968

 

[augirthedude]

^^^^ 4 plus. Dave’s stuff is awesome.

View attachment 1796899

Hopefully 4plus painting process has improved. My rear bumper paint peeled off after the first AZ winter.

 

[gbogh]

@TRAIL TAILOR makes some high quality stuff from mild to wild. He's pretty busy these days though

 

[AdventureToolCompany]

View attachment 1802867

If your looking for ideas, here's mine from SROR out of Colorado Springs. I designed it and they built it. It's almost ten years old and still rocking it. The Lower rear quarter sliders are very important. Not only do they help support the load, by bolting to the frame, but will also help support the entire weight of the 60 as it protects the lower quarters. Good luck!