Metal-tech Pegasus Stage-5 and Goblin Stage-3 bumper Install (1 Viewer)

[PhatFJ]

Off-topic but just curious. What tires and wheel offset are you running? And what suspension changes?

Ok, the wheels are Level8 MK6 17" -10 offset, the tires are Cooper STMAXX 255/80 r17

 

[PhatFJ]

Can you tell me which factory wires you tapped in to for the rear lighting and backup camera? Are any instructions included with the bumper relating to the wiring?

I did not have any instructions on the bumpers. The wires you tap into are obvious when you pull the rear door panel. Here is a pic.

Here is the back up camera wire

Here is the harness I made

Just make sure you solder all connections. I used the gx plug for the camera and the backup lights came with pig tails. The camera plug is NOT waterproof so you will need to wrap it very well with a high quality electrical tape when you are done. You could also use rubber tape..

I made all connections in the door panel, not in the rear side panel, there really is not enough room in there.

 

[PhatFJ]

Oh, one other thing. I used CAT-6 stranded wire to extend the camera..

 

[JLee]

Oh, one other thing. I used CAT-6 stranded wire to extend the camera..View attachment 1444466

Did it end up working well? I have access to near-infinite supplies of that stuff.

 

[PhatFJ]

Did it end up working well? I have access to near-infinite supplies of that stuff.

Worked great, see pic on first page..

 

[JLee]

Worked great, see pic on first page..

Oops. That's awesome. Thanks!