150 - 200 in steel tops, plus hardware for gates. (another 50).. 250 total...thats a fair guess.
Builds Max Powerzz gets Max Power, or Watch Me Pull a Rabbit out of my Hat!
- Thread starter Max.Powerzz
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I need to get to it! There's a company in Montana that I'm flying out to have a final interview with in three weeks so we may be headed that direction soon!
Max.Powerzz
Cruisers and Art!
- Thread starter
- #43
I like the blacked out grill with silver Toyota, very slick. Tperry, I hope you don't mind but we are going to blatantly copy you 
The advance adapter is finally here, it's heavy.
The advance adapter is finally here, it's heavy.
Don't mind in the slightest! I think it'll look great. I'd just make sure the chrome on the actual emblem is in decent shape, otherwise you'll be taking it all apart to repaint that piece too.
Finally!!!!!
we waited almost 3 months for that adapter........
hey folks, if you need an AA adapters please plan on a 2 - 3 month wait.... this has happened to me twice now..They make great products , you just have to wait for them.
- Joined
- Nov 22, 2010
- Threads
- 44
- Messages
- 2,144
- Location
- Wilmington, NC
- Website
- www.kindredspiritscsg.com
Everything is looking great guys keep it up.
Have you changed the landscape of chesterfield with that 60 of yours yet? I was reading in the hardcore section.....looks good too my friend.
- Joined
- Nov 22, 2010
- Threads
- 44
- Messages
- 2,144
- Location
- Wilmington, NC
- Website
- www.kindredspiritscsg.com
Still workin on that, its actually at a farm on Ellisdale road.
My old house is on that road......right behind the old grave yard in crosswicks. There is a sign at the end of the driveway..."Crosswoods"
sorry for the hijack heffey.
sorry for the hijack heffey.
Last edited:
- Joined
- Nov 22, 2010
- Threads
- 44
- Messages
- 2,144
- Location
- Wilmington, NC
- Website
- www.kindredspiritscsg.com
Yeah sorry about the hijack. We can post over on my thread.
I pushed the rig out of the shop and was able to get a couple of shots of the rig while it was in the sun. Also got to work on getting the adapter onto the 4l60e tranny and rebuilding the toyota split case too.
heres a couple more...also got the grill painted flat enamel black.
got the adapter on the 4L60E. I had to cut a couple of inches of the output shaft off the tranny to get the new spud shaft on there for the spitcase.
got it all mated up last night.......wifey was a tad bit mad coming home after 9pm. (took some finessing to cool her down) LOL....heres a couple shots of the adapter on the tranny.
This thing is turning out so sick! Those rear quarters really do look factory, or like they should have from the factory.
Someday. Someday.
It's funny, I went to high school in Heber and can't for the life of me figure out where this barn is and why I haven't noticed it before. It looks like a cruiser playground. Sheesh.
Someday. Someday.
It's funny, I went to high school in Heber and can't for the life of me figure out where this barn is and why I haven't noticed it before. It looks like a cruiser playground. Sheesh.
Max.Powerzz
Cruisers and Art!
- Thread starter
- #56
Those new swept lines are gorgeous, it just looks faster! My deepest apologies to the family, if I hadn't been gabbing yesterday afternoon and distracting you guys you probably would have been home hours earlier. There's some magical quality about the cruiser barn that makes time go faster and my mouth yapping longer.
We freaked out a bit when opening the adapter box, it was a four bolt adapter and we needed a 6 bolt. Turns out if you use the later 6 bolt 4L60E they just make an adapter for their adapter, hmmm. That stinks you had to cut the shaft, is that because we mated different t-cases together and changed the dimensions? The 2-lo and the trick 4-wheel drive will be great, getting rid of the vacuum lines in favor of fj60 mechanical linkage.
And I love your location: "Battling Bullwinkle..."
We freaked out a bit when opening the adapter box, it was a four bolt adapter and we needed a 6 bolt. Turns out if you use the later 6 bolt 4L60E they just make an adapter for their adapter, hmmm. That stinks you had to cut the shaft, is that because we mated different t-cases together and changed the dimensions? The 2-lo and the trick 4-wheel drive will be great, getting rid of the vacuum lines in favor of fj60 mechanical linkage.
And I love your location: "Battling Bullwinkle..."
It is a cruiser playground!
we have 5 fj40's, 6 fj60's, a fj60 on a fzj80 frame and a fj55 on a fzj80 frame and 3 other fj55's..... oh and a 1952 land rover too. not to mention a trailer full of parts too. you really need to come up ty.
heres the lay out....
and another....
Oh my god. I really do need to get up there.
