lelandEOD

Thanks to a member sending me a link to this thread! The Window Rocket is my product. I'll start by answering a few questions- Austin didn't do anything sneaky in his video. He's a stand up dude and calls it like it is. I told him about the...

I have an oil pick up tube. PM me.

You will want a RHD gas pedal assembly. The LHD part does not play nice with the 80-series firewall.

@lelandEOD upon further inspection, it actually is a 1" lift.

Totally can

Can you make these out of clear acrylic instead of tinted?

Added this ram ball to where the seatbelt attached to. Available on the site now. Great place for me to have a charger from @Delta VS Rear marker replacement, i have a habit of breaking them..it has a red led. You can also go blank...

You could just swap out the 2 inch lift for a 1 inch lift. That's what I have on my truck and I have no problems with fan/radiator clearance.

This is correct. You will need to swap the right side cast-iron engine mount pedestal to a HDJ80 pedestal in order to line up with the existing frame mounts. The 100 series frame is wider hence the cast-iron pedestal is also too wide.

Definitely

Badass thread. Good work!

I concur with Onur. I spent some time digging in to it today (out of curiosity) and only found those two PNs.

Pedal assembly is showing the same part number: 78010-60010 throughout the entire run of the HDJ100/101 for auto and manual iterations. Only difference in part number is whether it's a RHD pedal or a LHD pedal.

Stock up on electrical spares for your imported HDJ80. All 80-series parts came from a Euro-spec 1996. Voltage Converter Timer - $350 Power Steering Computer - $150 Headlight cleaner control relay: $75 SPF Aux Power Distribution Box -...

Ooooh... I didn't know that (just an interested guy, over here). Do we know if it was just a superseded PN or if they are not interchangeable?

I have a couple Delta/Wits End 80-Series parts I no longer need. Both are used parts. The Wits End ashtray switch panel is the version for factory style switches. I did lightly file the sides of one of the switch pocket to fit a switch, you...

Bought this for my FJ60 project before I realized it's not needed. Still wrapped as received from Flatout Offroad in New Zealand. $75 plus the ride.

New in Box (still sealed). Bought from Cruiser Outfitters and changed direction. $250 plus the ride.

I've got a RHD version I can trade you.

Subscribed! I want one for my baby.

Wins. I'm happy (for now) with the outcome from both experiments. I will continue fussing with the warning light; I know I need to tone down the LED output just a bit and want to follow the contours of the factory dash facia openings a...

Super cool product. I've been wondering what I'm going to do for the glovebox on my current project. Now I know!

This is some really really cool stuff.

Thanks for the ideas!

Maybe change the mold design so that it doesn't drop out the other side. Preheat the mold to ensure the alloy doesn't create voids. I think your alloy is cooling too quickly as it's being poured in. Look at old musket ball molds for inspiration...