Lumberjack Engineering: 3D Printed (and beyond!) solutions for the 100 Series Platform. (4 Viewers)

[daohaus]

@LJE you should consider making face plates for the cassette slot that’s contoured to the center stack. There’s some owners that have put aftermarket stereos where the cassette deck would reside and no one makes a face plate

 

[Scotty UZJ100]

New product coming soon!

This is an auxbeam/switchpro/fuse panel/etc tray mount that'll fit all the 100 series, 98-07. It fits next to the fuse box in the engine bay & lets you mount all manner of things. The horizontal portion fits the one-sided Auxbeams great (BA/RA/GA/AR/etc), and the verticle part has mounting provisions for *both* the Auxbeam breaker and a Blue Seas battery cutoff that people often use as a winch cutoff switch.

This was a 3D printed prototype to check fit, but @MongooseGA will manufacture these out of the same 12 gauge steel as our other Auxbeam mount! This mounts using existing threaded holes in the fenderwell.

It's tight, but everything will clear with enough room to run the wiring.

Need this. Wold work great to hold my cut off switch and breaker from my rear inverter and fridge setup

 

[LJE]

Need this. Wold work great to hold my cut off switch and breaker from my rear inverter and fridge setup

You can get one!! They're available now over at theartisangarage.com !

 

[Scotty UZJ100]

You can get one!! They're available now over at theartisangarage.com !

Damn I totally missed that. I thought that product was only for the 2003 + fender mount and I just placed an order for you wolfbox mounts too.

 

[LJE]

Damn I totally missed that. I thought that product was only for the 2003 + fender mount and I just placed an order for you wolfbox mounts too.

@MongooseGA recently revised those listing a bit to consildate the Auxbeam engine bay mounts under one item.

For what it's worth though, theres no shipping difference in one order vs splitting it for those two items - the wolfbox mount kit ships from me (in Indiana) and the metal parts ship from @MongooseGA (who is in Georgia).

 

[jaewastooshort]

I got in my wolfbox mount kit (a couple of days ago, actually) and it looks great! Hoping to get it installed this weekend.

 

[LJE]

I had someone reach out and ask about mounting their radio faceplate to the front of the ashtray. That's funny, because I first got started designing these mounts because I had a KG1000 faceplate I wanted to mount there!

Anyways, I had him ship his Kenwood faceplate to me & I got to work. Here's the result - this is designed to snap onto the front of the 98-07 LC (or 98-02 LX) ashtray, replacing the factory trim. It'll be heading his way tomorrow!

Need something odd mounted in a weird space? Shoot me a message!

 

[LJE]

Someone needed center cap spacers for some snazzy Raceline wheels in a hurry for an upcoming road trip.

They shipped me a center cap & it arrived yesterday - some CAD, a couple quick iterations, and a set of five spacers is headed back to the owner today! I figure a 12 hour turn around time isn't too bad.

Once they verify fitment these will be available over on theartisangarage.com, just like all my other products!

(maybe @choyota needs some?!)