Looks like someone’s been in here before (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 15, 2008
Threads
4
Messages
28
Location
Bellingham, WA
As @OTRAMM would say: ”Looks like someone’s been in here before.”

post your examples!

3D15B2EE-0C8D-4158-A79B-25E6CC114695.jpeg
 
Only Ryan and me have been in there. LoL
 
I'll play
008.JPG

009.JPG


I'm sure it helped with a more efficient spark and doubled the gas mileage! Came installed on my rolled over parts LX
 
kyber crystals? :eek:
 
Yup, multiple pure quartz crystals wrapped in a thick gauge single strand copper wire.
 
Those are healing crystals, no need to perform maintenance after install.
 
I'm sure it helped with a more efficient spark and doubled the gas mileage! Came installed on my rolled over parts LX

That will be hard to top.

Best I have. This was what I considered a parts truck. The seller had a different opinion. I let him keep it.
5D271798-FC53-4559-B390-7973C1DE6677.jpeg
39003661-E3E4-42AA-A62E-04AF8D20DA9F.jpeg
 
Last edited:
No preload on the front wheel bearings resulting in destroyed spindles, and inner axle on the DS was installed backwards, clip end for birf was jammed into the diff. Thank god it came out with the clip still in place.

1A9CB4C5-2F8E-4A2E-99C0-162A3ED3C6CC.jpeg


62FDBF3B-18B8-4A49-AC83-2DF5D8CC138B.jpeg
 
I wish I had a picture of the hole in the floor of my old Ranger that someone patched by riveting on an old license plate.
Pah! Amateur. We used old 55 gallon drums as teenagers.
 
Dilithium crystal are drained. We need more power Captain!
 
Or it could be Kryptonite.
 
That will be hard to top.

Best I have. This was what I considered a parts truck. The seller had a different opinion. I let him keep it.View attachment 2453189View attachment 2453191

When I see crap like that it makes me think about all the other idiots out there that have done similar and they may be driving towards me, in front of me etc. Of course the temper and springiness is gone the moment you heat that by welding. Spring steel will air harden after heating somewhat..,. but not enough.
 
I wanna play .... think there may have been a HG issue with the previous owner. Pretty sure his solution was to just go apesh!t with BARS stop leak until it stopped leaking. Lesson learned, do NOT buy a one way ticket to go 3 states away to pick up a truck you buy online.

20170831_124823.jpg


20170831_124906.jpg


20170831_125530.jpg


20190425_145402[1].jpg


20170831_130424.jpg
 

Users who are viewing this thread

Back
Top Bottom