Local For Sale/Wanted Section! (5 Viewers)

[shmukster]

88 truck

I hate to see Chris selling this truck but have to throw my two cents into the deal. This is a good truck- was owned by me or my brother in law for years and was a faithful vehicle- never ever let me down. It has lots of power and I believe it's a good vehicle. I wheeled with Chris at rausch Creek and the truck is quite capable. The workmanship by John merkey is outstanding. This could be a great truck for someone. Gary S

 

[racefanmartin]

Wanted; Divorced NP205

Have a friend looking for a divorced NP205 for his Heepster...any info please PM me...

 

[Bigmoose]

I have a np205 for sell in Warren,Pa. It's out of a 1970 chevy truck and it's got an sm465 adapter with it. Shoot me a PM, if interested MOOSE

 

[caz]

Looking for a 60/62 rear axle

I am debating swapping in a 60/62 axle for the width to the rear axle on my 40 or adding 1-1/2" spacers. I am leaning toward the 60 axle, but I don't have one!

Anyone have one for cheap/free that has the axle shafts and brake parts? I don't need the 3rd.

Thanks,
CAZ

 

[mls57jax]

Warn 8274 on ebay CHEAP

No affilliation.

Tiny URL - create a shorter link

Mike in PA

 

[jtaco1]

Wanted 84-89 4 Runner tail light lens

Well I popped a drivers side tail light lens at rasuch last weekend and need a replacement, the parts stors want $45 a piece Let me know if anyone has one.

 

[norville]

tractor for sale OT

SOLD


Sorry if it's a bit off topic, (jeff shoot me a pm if I should move it.)

But, here's a dream that will never be realized. I picked up a JD300 and I know I won't do what this tractor deserves.

I got this from my neighbor, I believe he was the original owner. And up till about 7years ago? he was still running it. It's a case 195 with a 12 hp kohler engine with hydrostatic drive and hi/low gears . It has front PTO's an extra set of turf tires and wheel adapters. Snow blower attachment, a set of chains and 2 sets of wheel weights.

Here's the story. I bought this off the neighbor about 4 years ago, I drove it to my place. Thought I needed a big tractor plus all the attachments. Great, but it needed some work I drove around the property a few times and I ran it a good part of the year( hauling and chugging the kids along) Year two, it got used less and year three even less. this is year 4 and I tried to start it this year and the battery is gone and my jumper doesn't have enough juice to spin the motor up to speed to catch. All the bearings in the mower and blower are most likely frozen up but they are still pretty solid.

I'm in pa 18707 right off I81.I asking $250 I can get more pics and any numbers on it if you need. This is a a great tractor to restore.


thanks

bob



http://temp.corvetteforum.net/c3/norville//im002222.jpg

http://temp.corvetteforum.net/c3/nor.../im002222a.jpg

http://temp.corvetteforum.net/c3/norville//im002223.jpg

http://temp.corvetteforum.net/c3/nor.../im002223a.jpg

http://temp.corvetteforum.net/c3/norville//im002224.jpg

http://temp.corvetteforum.net/c3/norville//im002225.jpg

http://temp.corvetteforum.net/c3/norville//im002226.jpg

http://temp.corvetteforum.net/c3/norville//im002227.jpg

http://temp.corvetteforum.net/c3/norville//im002228.jpg

http://temp.corvetteforum.net/c3/norville//im002229.jpg

http://temp.corvetteforum.net/c3/norville//im002230.jpg

http://temp.corvetteforum.net/c3/norville//im002231.jpg

 

[caz]

Well I popped a drivers side tail light lens at rasuch last weekend and need a replacement, the parts stors want $45 a piece Let me know if anyone has one.

I probably have one if you don't need it immediately. My stash is over at my parent's house. I should be over there sometime in the next week.

CAZ

 

[jtaco1]

I probably have one if you don't need it immediately. My stash is over at my parent's house. I should be over there sometime in the next week.

CAZ

That would be great, I don't really need it until a few weeks anyways, but the sooner the better in case I get a chance to drive it around.

THanks

 

[norville]

I'm looking for a pair of 14" tires for my trailer. some where about 25" or bigger would be best, they need to be at least "C" rated and non dry rotted.

thanks
bob pa 18707

 

[Wayneraintree]

'66 FJ40 hard top

A Toyota tech at the local dealership is selling a typical PA Land Cruiser... little rusty but he says it is unmolested and original. He is asking 1000$ and is in Beaver Springs, PA.

I am going to pass on it so if you are interested, PM and I'll give ya the contact info

 

[zucruisers]

i think someone was talking about wanting some newer chevy seats for their pig?...i dont remember who it was though...but here's a pair for sale -

Keystone Krawlers :: Log in

and a smokin deal on an incomplete formula toy...
Keystone Krawlers :: Log in

 

[zucruisers]

i guess you have to register on KK to view those threads

 

[caz]

Posting from the KK board
_______________________________
The time has come...

For personal reasons that I would rather not dive into here, I am thinning the heard. The bike went today also and you'll see the 97 4runner posted next week.

If anyone knows someone who may be interested, please pass this post on.

I'm sure I'll forget something but here she goes.

$3,000 Firm

- not completed -
DOM Formula Toyota Chassis #504
DOM stinger, dash bar, frame mounts
Great running 22RE FI motor w/stripped down harness
92 Toyota 4x4 X-cab Frame
1988 Toyota Rear Axle with Full Detroit Locker
1985 Toyota Front Axle with Aussie Locker
W56 5 Speed Transmission
Dual Toyota Transfer Cases w/ stock gears using Marlin Crawler Adapter
35x12.50 MTRs on 8” black rock crawlers
12 gal aluminum fuel cell
High Steer Crossover Steering Kit
pitman arm
Front Drop Hanger with Greasable Bolts
Frame Tubes & Jigs
Front Bilstein Shocks 14"
Vented Rotors
Bumpstop Extensions
Bumpstops
Front Axle Gusset
Axle Diff Armor
Knuckle Service Kit
Wheel Bearing Kit
Spring Pads
Rear shackle hangers
IFS Power Steering Box mount
Double sheer tabs for seat and belt mounts
Toyota 3 core radiator
Taurus Fan
(seats, harnesses & gauges not included)


They are all here: dogdenii's photosets on Flickr

 

[Wayneraintree]

Sorry to see it go..... but OTOH... SCREAMING DEAL

What a nice collection to assemble and thrash

 

[jtaco1]

I'm gonna have to keep that F-toy in mind incase my 4 Runner sells

 

[jamarquardt22]

JT- buy his duals and bolt it all togeather. imagine all the levers youd have.

 

[jtaco1]

JT- buy his duals and bolt it all togeather. imagine all the levers youd have.

HAHAHA, my rear driveshaft would be like 6" long. THe guy that was somewhat interested in my Runner backed out, so back to the regularly scheduled program

 

[jtaco1]

Wanted Pickup Bed with tail gate

Anybody got a pickup bed laying around or know of one. Looking to get the back portion with the tail gate to bob and graft onto my 4 Runner in the future. That way I am shorter and have a tail gate without glass.

 

[jamarquardt22]

Ok, Joe. ever think you may want to wheel in the winter? putting that top back on could make it more fun when its 14* outside.