Local For Sale/Wanted Section! (2 Viewers)

[jtaco1]

Ok, Joe. ever think you may want to wheel in the winter? putting that top back on could make it more fun when its 14* outside.

I can always section the hardtop to fit and put a plastic window in. Or just turn up the heat and wear some Carharts

Not sure how much wheeling I will get in this winter anyways with the baby being born

 

[caz]

I have a black 4runner tailgate if you want to put a straight one on there for now

I never did look for that tail light. Did you find one?

CAZ

Anybody got a pickup bed laying around or know of one. Looking to get the back portion with the tail gate to bob and graft onto my 4 Runner in the future. That way I am shorter and have a tail gate without glass.

 

[jtaco1]

I have a black 4runner tailgate if you want to put a straight one on there for now

I never did look for that tail light. Did you find one?

CAZ

That would be great with the tail gate, what do you want for the tailgate, hopefully not too much, she ain't in a beauty contest

I did end up finding a pair on Ebay for a reasonable price.

Thanks

 

[caz]

The tailgate isn't anything too great!

DCP01822.jpg

$50 - come and get it - Strasburg, PA

You can browse for other parts while you are there.

CAZ

That would be great with the tail gate, what do you want for the tailgate, hopefully not too much, she ain't in a beauty contest

I did end up finding a pair on Ebay for a reasonable price.

Thanks

 

[jtaco1]

The tailgate isn't anything too great!

DCP01822.jpg

$50 - come and get it - Strasburg, PA

You can browse for other parts while you are there.

CAZ

Sounds good, I may be heading down that way in September to take my daughter to see Thomas again, damn train. My dent is in the same spot as the one you pictured, but mine goes in about 5" more

 

[caz]

Searching for 60/62 rear axle

My old message slipped down on the list so I thought I would shoot out another..


I am looking for a 60/62 rear axle to use on my 40. The only thing I don't need is the 3rd. I don't have a lot to spend and would like to keep it less than $150 if at all possible.

Thanks!
CAZ

 

[caz]

'79 fj40

All,

I stumbled upon a '79 FJ40 today. It is really rusty, but the drivetrain is good - and everything under the hood is stock.

The ONLY parts that are good on this are the engine/tranny/transfer/axles and misc little parts. The frame and body are rusted beyond repair and there is no top or windshield.

The guy is asking $600 - which I deemed too high for what I need off of it. He pointed out that he can get that for scrap..... darned scrap prices!

I am looking for someone who wants to split this up with me.

I would like the 2f engine accessories and brackets from the front of the engine. I would also like the 3rds.

This would leave the engine/tranny/transfer and a disk brake front axle. I am willing to pick it up and to part it. Let's work a deal!

Email me if interested.

CAZ

 

[OldTrailFab]

might wanna call up the scrap yard and find out what they're paying per pound. around here you probably wouldn't even get $300 for that in scrap, minus the cost of hauling it there. you can definitely beat the guys price down a good bit

 

[JERSEY80]

1997 CE 30k original miles in Philly area

Collector's edition.........1997 on craigslist

LANDCRUISER RARE 1997 FZJ80 30k miles Collector's Edition

 

[Wayneraintree]

'75 2F Coil and Carb needed

--------------------------------------------------------------------------------

Just throwing this WTB note out there:

I am hoping someone has a functional carb and coil for my '75 Pig.. engine compression is good, just need these parts to make it run for a while before I dig into it. I need to move this thing around on its own

PM, post or email me at wayneraintree at hotmail,

TIA!

oh, yeah, I got another pig yesterday (thanks Gary! and thanks John for the tow : )

 

[76FJ40]

Hoarder!

 

[norville]

FS 1965 ford F250, I know I will regret this, but I hardly drive it any more and I'm being a bit selfish keeping it...


Very clean body Ca truck. 2wd, Warm 390 that was rebuilt in 99 I have a box full of receipts from PO and engine shop. It’s mated to a 1987 4 spd/ OD manual transmission. It pulls very nicely 70 MPH at about 2500 RPMs. Custom 60 gal fuel cell in the bed topped with steel tool box. I have the orig fuel tank out of cab. It has newer glass front and back, nwe door seals.

It has a dana 60 rear with 4.10’s and a posi unit. It has power steering and power brakes from a 72 . I have a bench seat from an 85 in there(still have orig). I also have a dual master cylinder and the brakes are like new. New radius arm bushings. New clutch/TO/and PB. Newer exhaust ,system with headers and an “H” pipe crossover and new dynomax mufflers. It also has a 2 speed windshield wiper. I’m running a dual electric fan,. New starter.

OK this is as rust free as you can get in the north east. Only rust would be from a scratch or two on in the bed or some surface rust on the under carriage. Really, it is rust and rot free. No real bodywork I’m aware of…except for the driver side box had a dent I the top rail from a tree falling on it.

This truck is very clean and well done it is no show truck but a great daily driver. I did about 4K a year on it. Drives straight and brakes great.

It is used as a truck and has “used truck” dents/dings here and there.

The paint on there was only supposed to kill the previous old color … yellow w/ orange flames But I like it, it’s orange peel satin finish for blue… It is not professional, but there aren’t any runs.

The truck would drive even nicer with some better tires and a sway bar. But it handles and drives great even with “E” rated tires. It has a great custom low profile rear bumper with 2” receiver. And an electric brake controller.

There’s a mount on the ceiling for a radio, sorry no speaker only the beautiful sound of a 390.

I’ve insulated the roof and doors. It has the zipper side pockets.

To finish it needs a carpet set, headliner and clean up the interior.

$4500 drive it anywhere.

If you meet my price I’ll throw in a ¾ disc brake setup (uninstalled). 2 extra gauge panels one sweep one round. Also an extra drag link, steering column, power brake booster, and cooling line. Original seat(it needs some spring work) and the gas tank… Some original ceiling panels. a Set or original steel wheels, CC door moldings

If anybody is interested shoot me an email and well talk.

Bob


http://temp.corvetteforum.net/c3/norville//100_1549.jpg


http://temp.corvetteforum.net/c3/norville//100_1548.jpg

http://temp.corvetteforum.net/c3/norville//im001789.jpg

http://temp.corvetteforum.net/c3/norville//im001788.jpg

http://temp.corvetteforum.net/c3/norville//im001790.jpg

 

[F-junker]

need a minitruck bumper

Hi fellas. I'm in MD right across the rebel/yankee border. I'm looking for a decent enclosed bumper (like a tjm or arb) for my 87 4runner that sustained some damage last winter from a red light collision.
Anyone have anything laying around they would like to turn into cash? Thanks Ken Carbaugh
Drop me a pm at mud if you know of anything.

 

[Wayneraintree]

Simex Extreme Trekkers 35 x 10.50 kinda rare

https://forum.ih8mud.com/sale-tires-wheels/233721-set-4-simex-extreme-trekkers-35x10-5-15-4sale.html

 

[Wayneraintree]

must resist... one ton axles...

pass drop d60 front axle 4sale in pa - Pirate4x4.Com Bulletin Board

 

[jtaco1]

If you have to buy it Jeff, you can buy it for me, It's my birthday tomorrow That is a good deal, wasn't Sean looking for one.

 

[Wayneraintree]

Well happy B-day to you! I should at least break the Toy axles or buy the new 42" SX first, which would necessitate the 1-tons : )

 

[Wayneraintree]

10K$ 100 series

1999 Toyota Landcruiser

 

[76FJ40]

Cleaning Out the Garage

Help me regain control of my garage! Can deliver to the Pig Run.



Most of Ryan's tools are in my garage now so I need to get rid of some of my junk if I ever hope to get a car back in the garage.

- New 35 x 12.50 BFG AT (still has the titties) - $100 OBO

- FJ Cruiser stock exhaust, complete - $50 OBO

- 5 FJ60 chrome wheels and tires, 235-75-R15, 4 are Dunlop Radial Rover A/Ts, the 5th is a mis-match. Wheels are OK but do have some rust, tread is decent - $50 OBO

 

[Straydog]

I'm looking for a 4.10 4 cyl 3rd. Anyone?

I have two 4.56 V6 thirds, one stock, one with new bearings, solid pinion spacer, and powertrax locker $200
I have a 4.56 3rd for an IFS front end with a set of extra shafts $50

This weekend I'll be pulling a Marlin built 4.7 tranfer case with 5 speed trans. T-case has less than 12k on it. $600