Local For Sale/Wanted Section!

[shmukster]

Looking for a bellhousing to go behind a 70's era 350 Chevy engine and to mate up with a land cruiser 4 speed transmission (actually an H55 but the bolt pattern is the same). Anybody have anything? I'd love to find a complete Marks setup. Best to email me if you know of anything shmukter@pa.metrocast.net Thanks, Gary

Found what we needed. Thanks!!!!!

 

[Cheap Cruiser]

Does anyone local to Philadelphia have a spare set of spindles for a 96 80 Series (I believe they are the same after 93/94 or so?) PN#: 43401-60081. Not looking for free just available as it seems anything ordered these days are now weeks out. Used is ok if it is clean and usable.

I was in a bind and had a "shop" install birfields and of course they messed up the preload and wiped the bearings and spindles.

 

[iptman]

Does anyone local to Philadelphia have a spare set of spindles for a 96 80 Series (I believe they are the same after 93/94 or so?) PN#: 43401-60081. Not looking for free just available as it seems anything ordered these days are now weeks out. Used is ok if it is clean and usable.

I was in a bind and had a "shop" install birfields and of course they messed up the preload and wiped the bearings and spindles.

You check with Cruiser Outfitters? They usually have them in stock and have quick shipping, after market options too.

 

[Cheap Cruiser]

You check with Cruiser Outfitters? They usually have them in stock and have quick shipping, after market options too.

Thanks for the heads up IPTMAN! I cvalled cruiserparts.net earlier today and looks like they are 2-3 weeks out on aftermarket (I guess not in stock but drop-shipped) and wont be able to pull used from trucks in yard until end of week.

Heading over to Cruiser Outfitters now.

 

[RWBeringer4x4]

Thanks for the heads up IPTMAN! I cvalled cruiserparts.net earlier today and looks like they are 2-3 weeks out on aftermarket (I guess not in stock but drop-shipped) and wont be able to pull used from trucks in yard until end of week.

Heading over to Cruiser Outfitters now.

Cruiser Outfitters and Georg at Valley Hybrids have both taken good care of me in the past. Georg has a pretty decent sized boneyard of used stuff too, if new is not available.

 

[JeepinPete]

I have a pair from my '95 if you are still in need...

 

[TheMU]

I am looking for an 80 DS side view mirror and a RFA1 transfer case for a future project.

Rick, I have one. Are you still looking?

 

[Stoshu]

Just listed these over in the classifieds if anyone is interested.

SOLD - FJ80 Radius Arms with OME caster bushings - NE PA

Set of OEM Toyota radius arms for an FJ80. They have Old Man Emu polyurethane caster correction bushings already pressed in. I believe the bushings are good for about 2 degrees of correction. Bushings have less than 5k miles on them and were never flexed hard. Rear bushings are OEM rubber. The...

forum.ih8mud.com

 

[rcracin]

Anyone have a good condition 1fz head lying around? Looking to get one rebuilt in order to do the headgasket on my truck in a single weekend. Thanks

 

[dr_dobro]

Ciao guys

Looking for a late model FJ40 tire carrier. It has to be from 06/80 to 83

Also, I will be also listing a nice and tight H41 with the transfer case from 74-78. Maybe 79 to 04/80 ? I am going to use a different set up

Daniel

 

[dr_dobro]

Anyone have a good condition 1fz head lying around? Looking to get one rebuilt in order to do the headgasket on my truck in a single weekend. Thanks

Where you able to find one ? I have one from a Lexus with 220k miles

 

[dr_dobro]

Does anyone local to Philadelphia have a spare set of spindles for a 96 80 Series (I believe they are the same after 93/94 or so?) PN#: 43401-60081. Not looking for free just available as it seems anything ordered these days are now weeks out. Used is ok if it is clean and usable.

I was in a bind and had a "shop" install birfields and of course they messed up the preload and wiped the bearings and spindles.

Dont know if you found any? I have several pairs in NY.

 

[brian]

looking to move a set of 5-285/75r16 bfg all terrains, not k02s. these are older and have nearly new tread, spare was never run. my inspection guy passed them this year but said the dry rot is getting to be excessive. they are on her 80 and like mentioned are old but have low mileage....will likely let them on steel spoked non oe wagon wheel that used to be black but are more brown these days.
doubt i would DD them, but maybe decent trail tires yet??

 

[shmukster]

96 and 97 factory service manuals for sale. Cleaning out some bookshelves and posted these on MUD they're in excellent condition. Link to posting:

https://forum.ih8mud.com/threads/pa-96-and-97-factory-land-cruiser-service-manuals.1277429/

 

[Rics4rnr]

I have a great condition NICE 45 liter cooler. Only used a couple times asking $70.

 

[Rics4rnr]

I have a set of 4 each 1st Gen Tundra 5 spoke wheel 17x7.5. These were previously Plasti dip and on my 3rd Gen 4Runner and there are scratches on wheels but still have a good original finish.

These are straight wheels and come with center caps. I am asking $300.

Text me at 856-264-3966

 

[FuglyYota]

After today’s outing, I clearly need a new set of rear springs. Anybody have a set of FJ60 rears, stock or low lift?

 

[shmukster]

I trashed a set just three weeks ago, fronts and rears. Wish I'd have known!!!!!

 

[FuglyYota]

Boooooo. Thanks anyway.

Also looking for a spare 33” tire/wheel, rear FJ60 axle shafts, and a 3.73 or 4.10 3rd.

 

[shmukster]

4.10 thirds I can help with. For what year land cruiser?