Largest tires on stock 100

[NoiseyH2O]

Can anyone post a picture of a stock 100 with the largest tires possible. No rubbing. I know to look it up but I can't find pic or a definite answer on size. New to 100's

 

[2000UZJ]

295/75/16. No rubbing

 

[CreeperSleeper]

Welcome! Just so you know, the FAQ thread that is stickied at the top of this forum has a lot of the info you may need. I would check there first before posting.

https://forum.ih8mud.com/100-series-cruisers/30754-100-series-lc-lx-faq-featured-trucks.html
(4th link down from the top)

 

[NoiseyH2O]

295/75/16. No rubbing

Thanks 2000UZJ. Cruiser looks great. That's with no lift? Exactly what I'm looking for. I've had a 62 and currently have an 80.

 

[2000UZJ]

Thanks 2000UZJ. Cruiser looks great. That's with no lift? Exactly what I'm looking for. I've had a 62 and currently have an 80.

It's a mild 1" lift. I miss those days.

 

[NoiseyH2O]

Welcome! Just so you know, the FAQ thread that is stickied at the top of this forum has a lot of the info you may need. I would check there first before posting.

https://forum.ih8mud.com/100-series-cruisers/30754-100-series-lc-lx-faq-featured-trucks.html
(4th link down from the top)

Thanks. I usually hang on the 62 and 80 forum.

Thanks for the info. Would live to see more pictures

 

[Trunk Monkey]

There's a whole thread of pictures at the top.

 

[FlammableFishie]

General consensus on this website is 285/75/16 with no rubbing and no lift, however as 2000UZJ said, once you get a lift you can easily fit a 295/75/16. There are countless threads on this forum with this question, do a quick search and you'll find more information than you'll care for!

FF

 

[OzTazz]

I've got 33x12.5R16 TRXUS MT's on mine - no lift (yet) and no scrubbing.

Sorry but this is the only pic i could find at the moment

 

[Layonnn]

No lift, 295s, no rubbing. (this was the 2nd day i got the 100 home)

 

[NoiseyH2O]

I've got 33x12.5R16 TRXUS MT's on mine - no lift (yet) and no scrubbing.

Sorry but this is the only pic i could find at the moment

Thanks. I have a new set of 33"BFG's on my 80 I might swap

 

[NoiseyH2O]

No lift, 295s, no rubbing. (this was the 2nd day i got the 100 home)

Nice rig

 

[NoiseyH2O]

Does any know of any side effects to adjusting the t- bars. I have a set of 33 bfg's I'm putting on. They shouldn't rub but I might try to get a little more hight



2000 80k miles.

 

[bluecruiser]

Does any know of any side effects to adjusting the t- bars. I have a set of 33 bfg's I'm putting on. They shouldn't rub but I might try to get a little more hight

2000 80k miles.

Search torsion bar and you will find plenty about this. You will want to adjust, make sure droop is okay and get an alignment afterward. There has been exhaustive discussion in this by previous folks....

 

[TwiceWithHair]

6" pro comp lift. Do it. If you haven't searched yet, general consensus is 285/75/16 will be fine. And as stated, you'll want an alignment after you mess with the front. 30mm socket and breaker bar are your friends.

 

[ENG MB]

No lift, 295s, no rubbing. (this was the 2nd day i got the 100 home)

Did you experience some rubbing in the full lock (when offroading)? and did you install any spacers? I have a lc with similar color in Baton Rouge though.

 

[Olaf99LC]

1999 with 285/75/R16

 

[riffman12]

1999 with 285/75/R16

View attachment 3830666

aren't those 18s?

 

[martinstickller]

Stock Everything, 2002.

285/75/16 Falken Wildpeak AT4W

 

[JM63]

Anyone tried 285/70/17 (or similiar 33") with AHC in LO mode?