- Thread starter
- #61
After the last rain storm, I noticed the head liner on passenger side in cargo area was wet and water dripping. After some HW on this great forum, I got pointed to the 3rd brake light. It will rain on Thursday so I'll see how it holds up, roof rack will be next if this doesn't work.
Got some NAPA plastic wedges to pop the light out and some black silicon gasket maker. Upon removal, one of the two nuts was about to fall off the 1" threaded stud. Well bingo, the ctr clips were already broke off and the light was bowing.
ended up adding a thicker bead to the top after I took this picture because the light was bowing so much without the center clips.
Got some NAPA plastic wedges to pop the light out and some black silicon gasket maker. Upon removal, one of the two nuts was about to fall off the 1" threaded stud. Well bingo, the ctr clips were already broke off and the light was bowing.
ended up adding a thicker bead to the top after I took this picture because the light was bowing so much without the center clips.