Jan. 12th HAMOM

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

well after talking with Dan at barleys he has assured me putting the lift on the 80 will take no time at all!!!!

so with that in mind we will also be performing these on the FJ62 to ready it for sale :doh:

1. power bleedy the brakes
2. install locker in the rear
3. reinstall smog pump and stock air filter (in case some one in one of those silly emissons states buys it :p )
4. replace rear axle seals

thats about it

on a side note would you guys rather have home made chilly or pizzas from Real Pizza where I work???
 
Oh I am in! I am your slave on the 62.:bounce:
 
Oh I am in! I am your slave on the 62.:bounce:

:cheers: you are a good man sir!!! I am thinking it is time for you to learn the fine art of the rear locker install so that you have it down pat for yours :D
 
I should be able to make it. I need to go see my buds Motes and Alec next door any way. Found out I've been eyein your cruisers for a yr. or so prior to joining the club anytime I went over. I showed a few pics from Cullowhee and the 40 was recognized. Small world. Lemme know if I can bring something. Have a good one til then!
 
I should be able to make it. I need to go see my buds Motes and Alec next door any way. Found out I've been eyein your cruisers for a yr. or so prior to joining the club anytime I went over. I showed a few pics from Cullowhee and the 40 was recognized. Small world. Lemme know if I can bring something. Have a good one til then!

dang it is a small world karl........ Motes is a good guy he comes over every now and then when I am wrenching on the cruisers to lend a hand and advice. he cut mary e's grass for her a few times when I was out on tour with toyota so he is top notch in my books

see you on sat. :cheers:
 
axle seals are a brease, just have a spare just in case you goof one up. What rear locker are you putting in? If its an Aussie or Lock Right then print out the install stuff in the tech links at the top. Made mine really easy. That conbined with having a new seal or rtv for the cover.
 
axle seals are a brease, just have a spare just in case you goof one up. What rear locker are you putting in? If its an Aussie or Lock Right then print out the install stuff in the tech links at the top. Made mine really easy. That conbined with having a new seal or rtv for the cover.

thanks for tips Matt :cheers:
 
they just need to be power bled; the master got a little air in it while I was away on tour....... I want them to be as crisp as they can be when I put it up for sale.
 
So far in UC, I've been to Chuck's, Ken's, Alan's, David H's , and Marshall's houses. Can't seem to find "Morning Glory Pl, Pendleton, SC" on any of the map services.

Are you in Witness Protection or something?:grinpimp:
 
Gehn,

Can you swing by my house near Asheville round 8 am?:D
 
I just looked on google maps and its called periwinkle court on their map. It is definitely the right place though. Just use google maps and search for periwinkle court and JP is half way down on the right you'll see the cruisers I'm sure.
 
When I looked it up it mentioned something about Simpson Rd. Anyone else going that way?
 
I'm in for car pooling. SInce I'm close to 85. Anyone wanting a ride in the 3 windows work 80 I have room. Lots of it.


I'm bringing 40wt oil, ballbearings, a chair, a cuzzie, and a diaper for Chuck.
 
From what I remember from greenville.

85 to 76 (clemson blvd) towards Clemson

Take right at Right at Memaws Cafe (Geril St) cross tracks and take left on Williams St. sc-993

Go a mile maybe and the subdivision is on the left. Take left into subdivision then right then left. Drive around yelling monkey boy while looking for Toyota products in driveway. Best to follow oil trail left coming into subdivision. It will lead you to him.
 

Users who are viewing this thread

Back
Top Bottom