I got one in the last 6 months from an online dealer for about that. Will paint with SEM Cordova Brown.
Interior Part Reporoduction
- Thread starter MrK
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I got one in the last 6 months from an online dealer for about that. Will paint with SEM Cordova Brown.
With the headlight washer, it might be a lot easier and cheaper to make a cover for the top of the reservoir that glues to the sides as I think most are only cracked on the top
g-man
SILVER Star
If Volk Engineering can repop them for 1/2 that price and in the right color I think they would sell. Edit: talking about the panel covers
g-man
SILVER Star
Just my .02 cents but most anyone who wants a headlight bottle washer is going to be owning a pretty much stock vehicle and would want a bottle that looked stock. lifted, rockcrawlers have already removed the bottle for other accesories.
Inner seatbelt receiver sleeves 
- Thread starter
- #26
Everything is possible! At the moment we are setting up the shop and will start doing some samples in coming month. We want to make sure we produce high quality items for you guys.Inner seatbelt receiver sleeves
this is great. i need an a/c bezel too!! you’ll sell a lot of them i bet
Toyota calls the 'A/C Bezel' an "Instrument Cluster Panel" ... There are various part #s depending on year and color, but there are basically only two variations the 55412-90A01 and 55412-90A02 (81-mid 84, mid-84-87) which probably only differ slightly on mounting points.
So, if one could be made in black, and universal, to fit 81-87 it would be a big item as they have been NLA for quite a while and they're ALL CRACKED !
So, if one could be made in black, and universal, to fit 81-87 it would be a big item as they have been NLA for quite a while and they're ALL CRACKED !
Not interior, but carb insulator plate would be nice. Assuming you can 3d print with an appropriately heat resistant polymer.
- Thread starter
- #31
Color of the bezel will not be an issue. I will bring it up to buddy of mine who is an engineer behind this and we will discuss a possibility of making them aluminum instead.
- Thread starter
- #32
Yes we can. At the moment we are just starting up so we will be producing items in high demand in order to enable further expansion.
Aluminum would be
I know nothing about 62's, Jon Snow.
Post a pic of the 62 panel.
Post a pic of the 62 panel.
Those clips are still avail
#68211-90K00
#68211-90K00
like wise i don’t know the 60 dash at all. here’s my 1989 fj62 layout.
seems to have more contours in the bezel than the 60 did.
seems to have more contours in the bezel than the 60 did.
Wow, thats great, thanks for the tip gila, will order sime pronto
