- Thread starter
- #461
HJ47 12HT refurbish in progress!
HZJ75
- Thread starter wongtsenhin
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Wong， why don't you install your spare 1HZ from your 75 into it? 
- Thread starter
- #463
After having the fun of turbo spooling around for about 6 years, an NA engine isn't in my list anymore! Moreover, I need more power out of a factory turbo engine ( human nature ). but definitely not now due to the tight schedule.
Moreover, I need more power out of a factory turbo engine ( human nature ). but definitely not now due to the tight schedule. 
Wong, thought this maybe of a little interest.
Caught up with this hzj75 on the East West highway from KL to Kuantan this afternoon. Something caught my attention when my gps indicated we were both doing 145kmph!
The front of the 75 looks all new with something like a VDJ79 front end and suspension. The picci shown depicts a different colour for the front end, indicating a possible halfcut. The front end was also quite remarkedly clean as compared to the rear. No piccies of the front as a little dangerous to take the piccies.
As I eyed up the truck the driver smiled and waved at me!!
it might be using a 80 series front coil suspensionhttp://s5.photobucket.com/user/gotoy/media/2013-05-29170538_zpsd894424c.jpg.html
Wong, thought this maybe of a little interest.
Caught up with this hzj75 on the East West highway from KL to Kuantan this afternoon. Something caught my attention when my gps indicated we were both doing 145kmph!
The front of the 75 looks all new with something like a VDJ79 front end and suspension. The picci shown depicts a different colour for the front end, indicating a possible halfcut. The front end was also quite remarkedly clean as compared to the rear. No piccies of the front as a little dangerous to take the piccies.
As I eyed up the truck the driver smiled and waved at me!!
- Thread starter
- #466
Well! At the first glance of the 75.
This is not an authentic 75.
1) This is a dyna box at the back.
2) The front end couldn't be VDJ79 or probably using 80 series coil as 79 coil is very rare in Malaysia, Furthermore is at the west.
3) The door swapped to Japan spec like what I'm having, not sure is electric window as I can't see what is inside.
I am pretty sure the front end could be a front cut, factory overfender, extended chrome front bumper could be with winch( not sure).
Lee!
Couldn't be a "ninja" axle as 80 series axle is much more wider than the body. Looks more like stock axle with coil conversion.
The front absorber was behind the coil, not inside.
I never seen one of these vehicles do 145kmph and also maintain 120 to 140 region for a good 30+km.
I never seen one of these vehicles do 145kmph and also maintain 120 to 140 region for a good 30+km.
Last edited:
- Thread starter
- #468
First of all, all HD cruiser front absorber is behind the coil except a LD LJ70 (Malaysia spec) not sure with other region.
All KZJ series front absorber are inside the coil.Secondly, you can do it at 150km/h, no problem at all except that the engine will be yelling at you " please reduce your speed, I'm a bit noisy here"
If not mistaken, the tacho should be pointing at 3k at the speed of 150km/h which is not a healthy sign.Personally, I haven't driven my 75 exceeding 120km/h. At the speed of 120, the tacho is showing at 2.7k ( heartache) and that was the time when I doing my overtaking.
100km/h is my normal speed and tacho at 2.4k which I think is a healthy speed. Or otherwise, with reducing gear set in the box or axle gear set installed.
- Thread starter
- #470
1st of all, you have to tell us your locality in order to proceed.
Australia will be the best place to source.
My name boat am live in Thailand I very interesting rear bumper your hz75 car please help me some thing how I can oder the rear bumper my email boat20@windowslive.com it possible please help me to find part
- Thread starter
- #474
BJ74 comes with 15BT + 80 Series axles.
Make my way up to Kota Kinabalu (the capital city of Sabah). Here comes one of my friend at KK BJ74 modded 15BT + intercooler, 80 series axle and coil sprung.
Wide fender to cover up the wide axle protrusion.
Make my way up to Kota Kinabalu (the capital city of Sabah). Here comes one of my friend at KK BJ74 modded 15BT + intercooler, 80 series axle and coil sprung.
Wide fender to cover up the wide axle protrusion.
Last edited:
- Thread starter
- #475
BJ74
More photos!
Bonnet scoop + Aiba work roof rack.
More photos!
Bonnet scoop + Aiba work roof rack.
Very nice ......
I would love to get my hands on that "Land Cruiser" bonnet protector.
I would love to get my hands on that "Land Cruiser" bonnet protector.
- Thread starter
- #477
Gorgeous view!
Trademark of "Land below the wind" Mt Kinabalu!
Trademark of "Land below the wind" Mt Kinabalu!
Cruiser head,
Arrival of the 60th anniversary Landcruiser custom book!
7 copies altogether, those of you who had ordered it.Please forward your corresponding address to me.
Are these in English?
- Thread starter
- #479
In Japanese!
Wong your car appeared in this forum a few years ago >> http://cforum1.cari.com.my/forum.php?mod=viewthread&tid=1842904&extra=page=5&page=3
