Ga. Cruisers Chat Thread (2 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

CID 96 said:
LOL! You never cease to amaze me, some of the s*** you come up with.

Race was fine. 9th overall, 2nd in my age group. Sorry no race day pictures.
Click to expand...

Sounds like you did well. What race was it? 9th overall is really good. I have to get back training. I fell off the running thing hard since Feb. When i was training regularly i felt so much better. We did go do the Sweetwater 420 5k a few days ago. My GF won her age group but which was great. I managed to do 2nd in my age group but that was it. Something crazy like 48th overall, way back.
 
Are all 9.5 diffs the same from 40, 60, 80 (rear)?
 
rc51kid said:
Sounds like you did well. What race was it? 9th overall is really good. I have to get back training. I fell off the running thing hard since Feb. When i was training regularly i felt so much better. We did go do the Sweetwater 420 5k a few days ago. My GF won her age group but which was great. I managed to do 2nd in my age group but that was it. Something crazy like 48th overall, way back.
Click to expand...
It was the Cheerios Challenge here in Covington 10K/5K. The 10k was 1st with the 5k about 2hrs later. That made for a ruff 5k.
 
i do as a matter a fact, spider gears already removed for a locker install ;)
 
alright sounds good.
 
All the diffs are interchangeable however they are not all the same. All aftermarket gear sets are all interchangeable and all fine spline at the pinion. 40/60 cases are the same but 80 cases have a slightly higher pinion. The 80 series 4.10 gears are 10 tooth pinions with 41 tooth ring gears, 40 and 62 4.10 diffs have 9 tooth pinions and 37 tooth ring gears. 60s came with 3.70s. The ring gear carrier also changes slightly over the years so you have to make sure the spiders are from the same diff as the carrier. If you are running a drop in locker or a full case locker it doesn't matter. All the setup kits are the same as well.

I run 80 diffs only because they have a slightly higher pinion and the cases are slightly beefier.
 
71-CRUISER said:
All the diffs are interchangeable however they are not all the same. All aftermarket gear sets are all interchangeable and all fine spline at the pinion. 40/60 cases are the same but 80 cases have a slightly higher pinion. The 80 series 4.10 gears are 10 tooth pinions with 41 tooth ring gears, 40 and 62 4.10 diffs have 9 tooth pinions and 37 tooth ring gears. 60s came with 3.70s. The ring gear carrier also changes slightly over the years so you have to make sure the spiders are from the same diff as the carrier. If you are running a drop in locker or a full case locker it doesn't matter. All the setup kits are the same as well.

I run 80 diffs only because they have a slightly higher pinion and the cases are slightly beefier.
Click to expand...


What about a 62 compared to an 80, because didn't 62s come with 4.11 gears?


...via IH8MUD app
 
Enjoying a good beer on a good night
ImageUploadedByIH8MUD Forum1398902930.270363.webp



...via IH8MUD app
 
Just me, but 16 of those there seems like it would hurt..:flipoff2:

And based on what I have seen on 1,000 ways to die, would probably kill you! :skull:
 
jynx said:
Just me, but 16 of those there seems like it would hurt..:flipoff2:

And based on what I have seen on 1,000 ways to die, would probably kill you! :skull:
Click to expand...
Ted didn't mean it like that. He has a little trick up his sleeve. :) shhhh
 
4xsteve said:
Ted didn't mean it like that. He has a little trick up his sleeve. :) shhhh
Click to expand...

Oh, I am pretty sure I know what he meant. :idea: I guess he couldn't get his expedition trailer finished up in time for the trip to TN in a few weeks.
 
71-CRUISER said:
40 and 62 4.10 diffs have 9 tooth pinions and 37 tooth ring gears.
Click to expand...

62s use the same housing as the 40s and 60s with the lower pinion. 100 series rear diffs are the same as 80s but have factory 4.30 gears.
 
71-CRUISER said:
62s use the same housing as the 40s and 60s with the lower pinion. 100 series rear diffs are the same as 80s but have factory 4.30 gears.
Click to expand...

Wow I totally missed that in the first post...

Thanks Michael!
 
AuburnFJsexy said:
Problem Solved...:idea:
Click to expand...

me likey but wouldn't one of your snobby beer bottles look kinda funny in that thing.

maybe you can carry a 6 pack of Pringles cans.

pringles.webp
 
Last edited:
You must log in or register to reply here.

Similar threads

Cruiserhead05
Cumming, GA - 200 “inspection”
Replies
0
Views
190
Cruiserhead05
Cruiserhead05
Last Flight Out
Anyone recognize this 40 from Woodstock, GA?
Replies
2
Views
656
Last Flight Out
Last Flight Out

Users who are viewing this thread

Total: 3 (members: 0, guests: 3)

Share this page

Back
Top Bottom