I got a sound in the front passenger side as if brakes wore out and was rubbing metal to metal. Turns out my whole hub assembly was loose, the c-clip sprung off and the outer edge of the flange was rubbing against the end of the splines at the edge of the cv axle. I’m thinking the nut may have backed off causing the tension on the c-clip ( won’t know until I remove the flange and check the lock washer, nut, etc.) Seems the only thing keeping it from falling off completely was the brake caliper. I can’t remove the flange as the splines are flattened and won’t allow the flange to slide off. Has this ever happened to anyone and how did you fix it, or does anyone have recommendations? P.S. I will never re-use my clips again!!!!