For Sale Front Axle Parts for FJ80

[Deathvalleypaul]

SoCal - NON LOCKER FRONT AXLE
Housing $150
Passenger Knuckle $125
Driver Knuckle $100
Spindles $75
Hubs $50
Birfields $50
Axle Shafts $35
ABS Sensors - call
Rotors $40 pair to $60 pair (slotted)
Calipers $70 pair

Shipping available from 91780 PLEASE DO YOUR OWN SHIPPING CALCULATIONS.
Paypal possible

 

[wpns4l]

what year is this off of? Im looking for the thicker drive flanges and longer birfs.

 

[Deathvalleypaul]

94

 

[Rhino5000]

I need the front drivers birf and axle for a 96 LC that has lovking diffs. Will these still work?

 

[Deathvalleypaul]

I have the birf and axle shaft from a non-locker axle.
Birf is the same, locker or not, but I am not sure about the axle shaft. Let me know.

 

[mcguirejohnson]

Could you post up some pictures of the spindles please?

 

[zapata]

Paul, do you have a rear elock actuator around?

 

[crash813]

Do you still have the passenger side inner axle and birf?

 

[Deathvalleypaul]

I have birfs and only the long side axle shaft.

 

[Deathvalleypaul]

Paul, do you have a rear elock actuator around?

No actuators, sorry

 

[crash813]

I have birfs and only the long side axle shaft.

Do you know if these are the longer or shorter stubs?

 

[Deathvalleypaul]

no

 

[Parnavaz]

no

I Pm'd you ,please reply

 

[ccslider]

I need a set of axles and birfs for a 97. Are the axles in good shape where the seal rides?

 

[Deathvalleypaul]

Yes. these are non locker axles. I will be back from Death Valley Saturday. 2 axle shafts and birfs 225 plus shippimg at cost. Birfs will be inspected by a mechanic before shipping.

 

[ccslider]

I'll take two birfs, can you pm me your PayPal etc.

Thank you

Yes. these are non locker axles. I will be back from Death Valley Saturday. 2 axle shafts and birfs 225 plus shippimg at cost. Birfs will be inspected by a mechanic before shipping.

 

[Pitch]

Interested in a spindle if it is in good shape.

 

[Deathvalleypaul]

Yes, Spindle is in good shape. I only have one good birf at this time.
I can pull them and pack them and ship them this morning. I can't give you a shipping estimate until they are in the box and weighed, but will try to get them to fit in a flat rate Priority Mail ship box if they can fit to save you shipping cost.

 

[cordrayj1]

Still have pass knuckle?

 

[Pitch]

Thanks for the follow up on the spindle, DVP. I ended up with a new one.