Builds Frog's 40 (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Battery is in, powered up the gages. Almost all electrical is done, just have to wire up the fuel pump.
IMG_20201106_002942748.jpg
IMG_20201106_002840841_BURST000_COVER.jpg
IMG_20201104_143146376_HDR.jpg
Pretty cool all the options available
 
Figured out the smoke, the map sensor was programmed incorrectly by me. I set it to internal initially. The terminator x computer has an internal map sensor built into it, and the little hand held does not give the option to program a stock sensor. This error was making the engine run rich at 12.7 afr. After hooking up the laptop I was able to reprogram the computer to use the stock LS map sensor and it runs much better (14.0 afr at idle). No smoke now
 

Users who are viewing this thread

Back
Top Bottom