1991 - 1992 FJ80 Performance Exhaust System
UPDATE: Prototyping and testing has been completed. Production is underway.
You can place your pre-orders here:
http://www.emspowered.com/storefron...uct_info&cPath=61_119_120_121&products_id=761
Pre-order Notes:
* Planned completion and shipping date around the last week of December
* When you place your pre-order your CC will be authorized, but no charge will be applied to your CC until the exhausts are shipping out.
* There is no deposit necessary to place a pre-order. Charges are billed to you once the exhausts are shipping out.
* If you have any special needs with the tailpipe or other parts of the exhaust make sure to note it in the "notes" section of the order during checkout so that we know.
* As with all of our products you can place your order online on our website or over the phone (512) 686-2800.
Back to back dyno testing of OEM exhaust vs EMSPowered exhaust:
********************************************************************************************
There doesn't seem to be a ton of interest in an exhaust system for these trucks, but since we have had a handful of requests over the last few years we're going to go ahead and make a run of them. I need one volunteer that can drop off their truck for prototyping of the new system. The exhaust system and installation and dyno testing before/after installation will be free for this one volunteer.
Requirements:
* Needs to be a truck that has a 100% stock exhaust still in place and functioning with no check engine codes
* Prefer factory size tires if possible. If not we can work around it
* Must not have a body lift of any sort
* Prefer no suspension lift either, but if it has we can work around it
* Must be in good running condition
We will need the truck for about 5-10 working days from start to finish. You will receive a new EMSPowered header-back exhaust with y-pipe, catalytic converter, muffler, all the way back to the exhaust tip and installation here at our shop.
We are located in Austin, Texas, make sure you'll be able to get your truck to us if you're going to throw your name into the list. If you're interested please PM me or email me at baktasht@emspowered.com
If you're not familiar with our work. Here are our FZJ80 80-series, 100-series, and 62-series exhaust systems:
FZJ80:
http://www.emspowered.com/storefront/index.php?main_page=index&cPath=61_119_120_121
100-series:
http://www.emspowered.com/storefron...uct_info&cPath=61_119_199_200&products_id=757
62-series:
https://forum.ih8mud.com/60-series-wagons/611121-free-emspowered-60-series-exhaust-2.html
UPDATE: Prototyping and testing has been completed. Production is underway.
You can place your pre-orders here:
http://www.emspowered.com/storefron...uct_info&cPath=61_119_120_121&products_id=761
Pre-order Notes:
* Planned completion and shipping date around the last week of December
* When you place your pre-order your CC will be authorized, but no charge will be applied to your CC until the exhausts are shipping out.
* There is no deposit necessary to place a pre-order. Charges are billed to you once the exhausts are shipping out.
* If you have any special needs with the tailpipe or other parts of the exhaust make sure to note it in the "notes" section of the order during checkout so that we know.
* As with all of our products you can place your order online on our website or over the phone (512) 686-2800.
Back to back dyno testing of OEM exhaust vs EMSPowered exhaust:
********************************************************************************************
There doesn't seem to be a ton of interest in an exhaust system for these trucks, but since we have had a handful of requests over the last few years we're going to go ahead and make a run of them. I need one volunteer that can drop off their truck for prototyping of the new system. The exhaust system and installation and dyno testing before/after installation will be free for this one volunteer.
Requirements:
* Needs to be a truck that has a 100% stock exhaust still in place and functioning with no check engine codes
* Prefer factory size tires if possible. If not we can work around it
* Must not have a body lift of any sort
* Prefer no suspension lift either, but if it has we can work around it
* Must be in good running condition
We will need the truck for about 5-10 working days from start to finish. You will receive a new EMSPowered header-back exhaust with y-pipe, catalytic converter, muffler, all the way back to the exhaust tip and installation here at our shop.
We are located in Austin, Texas, make sure you'll be able to get your truck to us if you're going to throw your name into the list. If you're interested please PM me or email me at baktasht@emspowered.com
If you're not familiar with our work. Here are our FZJ80 80-series, 100-series, and 62-series exhaust systems:
FZJ80:
http://www.emspowered.com/storefront/index.php?main_page=index&cPath=61_119_120_121
100-series:
http://www.emspowered.com/storefron...uct_info&cPath=61_119_199_200&products_id=757
62-series:
https://forum.ih8mud.com/60-series-wagons/611121-free-emspowered-60-series-exhaust-2.html
Last edited:
This is just my speed.
