For Sale/Wanted To Buy

[Brock]

If anyone is interested in a couple things I still need to get rid of either because I never use it or because the movers dont want to put it in their truck:

- Makita 10" LS1020, 4100 RPM , Mitre/Chop Saw, $35

- Plastic barrel, 50g, $FREE...by road for trash on Tuesday

- Weider Crossbow weight trainer with 420# of power bars and all attachments (pull down, leg lift, mil press, incline bench, etc) $75

- Bowflex Treadclimber TC5000 $300 going for $900 on Ebay used. I have it broken down into two parts so easy to load into truck or SUV


If anyone interested PM me and can send pics...I need it gone by 7 April. Earlier the better. PIcs just took so house is mess and desk has crap piled on it as we box things up in this last move before everything goes on 7th.... PM me or text me if you have my info and will text you pics back. If anyone interested PM me and can send pics...I need it gone by 7 April. Earlier the better... So make me an offer if interested I might take it...

 

[FJMOSES]

may be interested...if you have anything left after we complete our move....should be done hopefully 15 April.

Sweet, let me know. As of right now I have 5 boards and 6 kayaks left.

 

[collk22]

Spotted a 2001 LC for sale in MP - located in the parking lot of Hughes Rentals on bowman. Looked clean, though I don't know much about 100 series specifically. No price or details listed on the for sale sign, just a phone number.

 

[Brock]

Sweet, let me know. As of right now I have 5 boards and 6 kayaks left.

if you still have my email, shoot me a list of the boards and yaks you have so I can let you know what we MIGHT want... I would most likely only get one rigged or setup for fishing...but for Christine a regular yak and she has mentioned be interested in SUP board as well. Good luck Caleb...

 

[greenseaman]

 

[greenseaman]

This FJ73 is at JP's auto sales in Pawley's Island. It is LHD and supposed to be from Europe and fully restored. It is a 1982 I think and it has a 22re 4 cylinder and manual transmission. 2000 miles since being restored. Plus it has ostrich leather interior!!! They want $22,900 for it!! It is really pretty!

 

[Soju]

Anyone need a stock 80 series front bumper? Just wanted to check before it goes in the trash.

Also have the running boards and a bent brush guard.

 

[JohnVee]

Anyone need a stock 80 series front bumper? Just wanted to check before it goes in the trash.

Also have the running boards and a bent brush guard.

I think somebody posted the need for a stock front bumper in the Onsc classifieds in the last month. You might want to post this there and see what happens. Might be able to Mudship it to Uwharrie this weekend with Jeremy, and to somewhere else from there.

 

[southerncruiser62]

For Sale/Wanted

Selling our 2007 GX470, details in link above.

 

[GLTHFJ60]

2F parts for sale!

For Sale: - Assorted FJ60 Parts in Durham, NC

 

[greenseaman]

Anybody got a 33x9.5 or 10.5r15 tire that I can get for a spare? I've got a narrow rim to put it on I just need a decent tire. If you'll be at GSMTR and can take it up there that would be great. I found one in MB but the guys business partner sold it without him knowing it!!!

 

[77wagon]

Fj40 roof rack for sale. Needs to be prepped and painted and needs mounts (I've got some I could part with soon, but they are in use right now). $100 OBO Just wanted to post it here local first. If anyone wants it let me know.
54" wide x 60" long x 4" tall

 

[JohnVee]

Fj40 roof rack for sale. Needs to be prepped and painted and needs mounts (I've got some I could part with soon, but they are in use right now). $100 OBO Just wanted to post it here local first. If anyone wants it let me know.
View attachment 1255167

Measurements?

 

[77wagon]

JohnVee

Rack is 54" wide x 60" long x 4" tall (maybe able to mount it the other way also?)
Please make sure it will fit your vehicle- mine is a little "different" than others. It can be disassembled and shipped if necessary, but it still would cost a bit to send. You may besee in the pics where it bolts together. it seems to be made exactly the same as a Garvin Wilderness rack I just got. If you check their website it may show the details and some mounts that should work with it.

 

[tstepp920]

I'm looking to replace the FJ40 I sold 7 years ago. I would say it was a mistake but it helped get my girls through college. I would appreciate any leads. I prefer a "75" or newer. This is to be a project not a true restoration. I have set up alerts on CL. EBAY, and Google. Everything I get so far is on the other side of the country or ridiculously priced. Thanks in advance.

 

[dbenke]

keep looking, they are out there

 

[ErikinSC]

WTB ASAP :

I need a spedo cable for my truck. -74 with a 4 speed H41 Tranny in it.

I pulled and pushed the gauge cluster into place and broke the end of the cable.

Anyone ? I will be a GSMTR on Wednesday.... Beno is travelling this week, so I am searching before he gets back.

 

[JohnVee]

JohnVee

Rack is 54" wide x 60" long x 4" tall (maybe able to mount it the other way also?)
Please make sure it will fit your vehicle- mine is a little "different" than others. It can be disassembled and shipped if necessary, but it still would cost a bit to send. You may besee in the pics where it bolts together. it seems to be made exactly the same as a Garvin Wilderness rack I just got. If you check their website it may show the details and some mounts that should work with it.

Just seeing this. I don't check this clubhouse too often and wasn't tagged in your reply so I didn't know to check back. Either way, I can't find a need for it at this point. Thanks for the info and specs. Somebody will grab it.

 

[roadstr6]

Three Groove Harmonic Balancer/Crank Pulley Needed (FJ60/62/80)

The harmonic balancer on my 60 decided to part ways with the outer two-groove section of the pulley. All six rivets sheared off clean. I am in need of a good three groove HB/pulley. I thought I could use a spare I have here in the shop but as it turns out, it is a 2 groove so no go. I believe the 3FE pulley will work on a 60 series truck. The pulley diameter for the 3FE is smaller so a belt change will take care of that. If anybody has a good 3 groove HB/pulley they'd be willing to let go of shoot me a PM.

Thanks,

Dave

 

[Brock]

I brought back a truckload of spare parts, new parts, old parts, etc...with my FJ60 purchase. Some I will keep and others are available if you have a need. I have not inventoried everything but some of the items are:

- 2-3 center consoles
- 4 original steel chrome wheels (may keep and powdercoat as a good bit of corrosion if they dont clean up with steel wool)
- original mirrors
- lenses
- limited items from desmog
- running boards seen currently mounted
- original speakers

I have 4-5 boxes full of everything...will go through this weekend if I have time after troubleshooting the carb and desmog to see why it is running like dog s***.